Illuminating The Work Area; Self-Standing Function For Short Pauses In Vacuuming; Maintenance; Purchasing Accessories - Miele HS19 Operating Instructions Manual

Min. Lowest power level for light
soiling
Eco Medium power level for
normal soiling
Max. Highest power level for
heavy soiling
The floor covering detection function is
activated at every power level.
The Electrobrush power output is
automatically set to the optimum level
based on the type of flooring – this can
lead to a change in the operating noise.

Illuminating the work area

(depending on model)
The Electrobrush on your vacuum
cleaner is equipped with BrilliantLight to
illuminate the work area.
Self-standing function for short
pauses in vacuuming
(For safety reasons, this function can
only be used when the PowerUnit is
fitted at the bottom of the vacuum
cleaner)
If you are vacuuming with the
PowerUnit fitted at the bottom of the
vacuum cleaner, you can easily interrupt
operation while the appliance is
switched on.
 Swing the vacuum cleaner forwards
until the Electrobrush connector
audibly clicks into place.
The vacuum cleaner stays securely
upright, the Electrobrush switches itself
off and the battery is conserved.
If you then unlock the connector on the
Electrobrush, the Electrobrush will
switch on again.

Maintenance


Risk of injury caused by rotating
roller brush.
You can injure yourself on the rotating
roller brush.
Switch the vacuum cleaner off before
doing any maintenance work. Use the
On/Off switch on the Comfort handle
to do this.
It is recommended to use only genuine
Miele accessories bearing the
"ORIGINAL Miele" logo on the
packaging. Only these will guarantee
the optimum performance of your
vacuum cleaner and the best possible
cleaning results.
Please note that faults and damage
caused by use of accessories which do
not bear the "ORIGINAL Miele" logo
on the packaging are not covered by
the vacuum cleaner warranty.

Purchasing accessories

Original Miele accessories are available
from the Miele web store, Miele
Service, and your Miele dealer.
Original Miele accessories are identified
by the Miele logo on the packaging.
With 3D4U, Miele also offers free
accessories to download for your 3D
printer (www.miele.ca > Customer
Support > Spare parts & accessories >
3D4U – 3D printing instructions).
en-CA
23