Sanyo DCA M15 Service Manual

SERVICE MANUAL
INTEGRATED
STEREO AMPLIFIER
e Sanur
NOTE:
The photo on the cover shows the unit with a "SILVER"
front panel. The ''BLUE" version is identical in all respects.
NOTE:
The below mentioned specifications are mainly based on the
IHF measurements standard.
They can therefore riot be compared directly with specifi-
se SANYO
DCA M15
(EUROPE)
SPECIFICATIONS
cations based on the DIN standard or other standards.
POWER AMPLIFIER SECTION
Minimum RMS sine wave power
per channel, no more than
stated distortion and with
8-ohm load at 1 kHz (DIN}
Total Harmonic Distortion
|.M. Distortion
Speaker Damping
PREAMPLIFIER SECTION
Frequency Response
Phono (RIAA)
Aux (£1.0 dB)
Microphone (+3 dB)
Input Sensitivity/lmpedance
Phono
Tuner
Aux
Tape
Microphone
Phono Max. Input Capability
45 Watts
0.09 %
0.09 %
> 25
+0.5dB
20 Hz — 20 kHz
70 Hz — 4.5 kHz
2.5 mV/50 kohms
150 mV/50 kohms
150 mV/50 kohms
150 mV/50 kohms
1.5 mV/7 kohms
120 mV
Graphic Equalizer
50 Hz +12 dB
250 Hz +12 dB
1 kHz +12 dB
4.5 kHz +12 dB
15 kHz +12 dB
Hum and Noise (IHF Short Circuit, A Network)
Phono 72 dB
Tuner 80 dB
Aux 80 dB
Tape 80 dB
Microphone 64 dB
GENERAL
Power Requirements AC: 110/220V, 50 Hz
Power Consumption 296 W
Dimensions (W x H x D) 335 x 108 x 257 mm
Weight (approx.) 5 kg
—Specifications are subject to change without notice.—
WM-9144