Removal Of Anode-Cap Uu - Sony TRINITRON PVM-14N5A Service Manual

2-2-5. Removal of Anode-cap
Note: Short circuit the anode of the picture tube and 2. Handling Precautions
the anode cap to the metal chassis, picture tube (1) Don't hurt the surface of anode-caps with sharp shaped
shield or carbon painted on the picture tube, material!
after removing the anode. (2) Don't press the rubber hardly not to hurt inside of
anode-caps!
1. Removing Procedures A material fitting called as shatter-hook terminal is
(1) Turn up one side of the rubber cap in the direction built in the rubber. i
indicated by the arrow @), (3) Don't turn the foot of rubber over hardly!
The shatter-hook termian] wil! stick out or hurt the
Ul rubber.
@®
of
(2) Using a thumb pull up the rubber cap firmly in the
direction indicated by the arrow ©).
(3) When one side of the rubber cap is separated from the
anode button, the anode-cap can be removed by turning
up the rubber cap and pulling up it in the direction of
the arrow ©),
Anode button
2-4 SHIA Ciassis