Activating The Configuration; Fault 559 - Miele XKM 3200 WL LMD Operating Instructions Manual

en - Network connection
Activating the
configuration
Fault 559
58
The ,
IP address Subnet mask
the is 192.168.1.23, for example, enter
IP address
Use the arrow buttons  (right) and  (left) to move the cursor to

the option you require.
Confirm each entry with OK.

To save your entries, select the

firm with the OK button.
The interface configuration is only effective after the cleaning machine
has been restarted.
Wait approx. 10 seconds before switching the cleaning machine off

for a restart.
Switch the cleaning machine off and then back on again with the

 button.
Wait approx. 90 seconds for the module to initialise.

Then check if the interface is working.

If the fault message
programme is interrupted with this message, the RS232 interface is
activated and must be deactivated.
Open the menu for configuring the RS232 interface via

/ .
tings Interface
Select the
Ethernet

The RS232 interface is deactivated. After around 90 s, the module is
ready for operation.
, etc. must always be entered in full. If
symbol on the display and con-
OK
is displayed during commissioning or a
Fault 559
option and confirm your choice with OK.
.
192.168.001.023
Further set-