Service Note; Howto Return The Pinch Roller, Guide Roller And Elevator Cam To Stop Mode; Howto Return A Tape Into Cassette Half; How To Remove A Cassette.from - Sony SLV-360 Service Manual

SERVICE NOTE
1.
HOWTO RETURN THE PINCH
3.
HOW TO REMOVE A CASSETTE
ROLLER, GUIDE ROLLER AND
FROM A MACHINE IF A CASSETTE
ELEVATOR CAM TO STOP MODE
IS LEFT IN A MACHINE IN TROUBLE
1) Remove the VHS MD assembly from the machine. (Refer to
Execute the section 2, and keep rotating the flywheel-1.
section 2-4. Removal.)
When executing section 1 to 3, take care that a tape slack
2) Rotate the worm gear-1 of the cam motor beneath the MD
should not be caught by a mechanism or a tape should not
assembly in the direction arrow @ using a screw driver tip. be damaged.
,
4. HOW TO REMOVE DRUM
ASSEMBLY
Drum assembly
Front side of the
@ Remove connector
mechs
CNO01 from RP-195
board.
Cam motor
Fig. 1 @ Screw +P3 x 8
illustration : SLV-660HF
2. HOWTO RETURN A TAPE INTO
CASSETTE HALF Fig. 3
A tape can be rewound into a cassette half by rotating the
flywheel-1 of the capstan motor in the direction of @® with hand.
Flywheel-1
Timing belt