America Acer encourages information technology (IT) equipment owners to responsibly recycle their equipment when it is no longer needed. Acer offers programs and services to assist equipment owners with this process. For more information on recycling IT equipment, please go to: https://www.acer.com/ac/en/US/content/recycling...
Page 10
DISPLAY DATA CHANNEL(DDC) STANDARD TIMING TABLE...
Page 11
USB Cable (Optional) USB Type C Cable (Optional)
ATTACHING/REMOVING THE BASE Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. 1. Attach the monitor stand arm to 2. Secure the base to the arm of the the base.
Page 13
Follow these instructions to remove the base from the monitor. Note: Carefully place the monitor face down on a flat surface-sue a cloth pad to prevent scratching the screen. 1. Push up the split button to 2. Removing the stand base from the separate the base from the monitor.
SCREEN POSITION ADJUSTMENT In order to optimize the best viewing position, you can adjust the tilt of the monitor. • Tilt Please see the illustration below for an example of the tilt range.
Page 19
15-pin color display signal cable Threading Explanations Threading Explanations +5 V Green Logic ground Blue Monitor ground Monitor ground DDC-continuous data DDC return Line sync signal Red-ground Field sync signal Green-ground DDC-continuous clock Blue-ground 24-pin USB Type C cable PIN No. Signal Assignment PIN No.
Page 21
1. Turn off your computer and unplug the power cord. 2. 2-1 C onnect Video Cable a. Make s ure both the monitor and computer are powered-OF F . b. Connect the VGA cable to the computer. (Optional) 2-2 Connect HDMI Cable (Only HDMI-input model) (Optional) a.
Page 22
Note:The location and names of the function buttons and power button on the monitor may vary according to monitor model,and some button may not available for some models. Type1 HotKey 1,2 buttons. Press to activate user defined hotkey function. Type2 Power Type3-1 Type3-2...
Page 23
Using the Shortcut Menu The button and the actual functions depend on detail model.Some functions might be grayed if the model can not support . Note:Please select the button function operation according to the actual button type. The button of Type 1 The button of Type 2...
Page 24
The button of Type 3 The button of Type 1 The button of Type 2 The button of Type 3 The button of Type 3-2 Open the Function page to select the menu function,and then use the Button Menu/Navi/Ok to adjust the settings you need.When finished, Pull left the Button Menu/Navi/Ok to return to the previous level or exit the menu.
Page 25
Adjusting the Setings Use buttons to open the OSD and navigate to the Settings you need. The button of Type 1 Use Buttons 1/2 to select the Settings you need from the OSD. The button of Type 2 Use Buttons 1/2 to select the Settings you need from the OSD. The button of Type 3-1 Using the Navi/Ok button, to select the Settings you need from the OSD.
Adjusting the Picture Mode - Standard Picture Brightness Color Contrast Audio Standard Low Blue Light Black Boost Gaming System Super Sharpness 1. Brightness: Adjust the brightness from 0 to 100. Note: Adjusts the balance between light and dark shades. 2. Contrast: adjust the contrast from 0 to 100. Note: Sets the degree of difference between light and dark areas.
Adjusting the Color Mode - Standard Picture Gamma Color Color Temp. Warm Audio R Gain Gaming G Gain B Gain System R Bias G Bias B Bias Mode - Standard Picture Modes Color Space Standard Color Audio Grayscale Mode Gaming 6-axis Hue 6-axis Saturate System...
Page 28
Mode - Standard Picture Volume Color Mute Audio Gaming System FreeSync Ultra-Low Latency FreeSync Premium Ultra-Low Latency...
Page 29
Freesync Premium Pro Ultra-Low Latency Adaptive-Sync Ultra-Low Latency /Freesync Premium/Freesync Premium Pro/Adaptive-Sync If FreeSync /Freesync Premium//Freesync Premium Pro/Adaptive-Sync is ”OFF”, then the user can set Over Drive to...
Page 30
cards only. Freesync Premium: Select On or Off.Freesync Premium is available for AMD supported graphic cards only. Freesync Premium Pro: Select On or Off.Freesync Premium pro is available for AMD supported graphic cards only. Adaptive-Sync: Select On or Off. Adaptive-Sync is available for AMD supported graphic cards only.
Page 31
Mode - Standard Picture Language English Color OSD Timeout Audio Transparency Gaming OSD Lock System Note: 1. For Side 9 key,Must press Navi Key in the middle to unlock OSD. 2. For side/Bottom 1/5key,except power key can be unlocked.
Adjusting the System Mode - Standard Picture Input HDMI2 Color Ambient Light Audio Auto Source Gaming Hot Key Assignment Wide Mode Full System PIP/PBP DDC/CI Mode - Standard Picture HDMI Black Level Normal Quick Start Mode Color Audio Power-off USB change 1.
Page 33
Mode - Standard Picture Color 1280x720 Audio H/V Frequency H:45KHz V:60Hz Gaming Mode Normal Series Number System Information HDMI1[2.0] 1920x1080 H/V Frequency H:55KHz V:60Hz Mode Normal Series Number Exit Move...
EU Declaration of Conformity ED270R ED270R EN55032:2015+A1: 2020 Class B EN 55035:2017+A11: 2020 EN IEC 61000-3-2:2019+A1:2021 Class D EN 61000-3-3:2013+A2:2021 EN IEC 63000: 2018 Mar. 25,2023 Acer Incorporated (New Taipei City)
Page 37
ED270R ED270R xxxxxx (“x” = 0~9, a ~ z, A ~ Z, or blank)