Gaming Headset - Asus Xonar Xense User Manual

Front panel audio header
5
Connect one end of the front panel audio cable to the front panel audio header on
the audio card, with the other end to the chassis-mounted front panel audio I/O
module.
Aux Input Header
6
This 4-pin header usually connects to the Analog Audio output of TV tuner card or
other sound source inside your computer. To monitor your TV tuner card's audio
from this Aux-In, you must enable the "monitor" function for Aux-In in the Xonar
Xense Audio Center's recording mixer.
S/PDIF Header
7
Connects to supported graphics card.
Power connector
8
Connects to the power cable of your power supply unit.
PCI Bus golden fingers
9
Connects to the PCI Express slot on your motherboard.

Gaming headset

Microphone boom arm
1
Allows you to move your headset's microphone comfortably close to your mouth.
Volume control and mute box
2
Allows you to increase/decrease the volume of your headset's audio output and to
put it on mute mode.
6.3mm connectors
3
Connects your headset to the audio card's Mic In/Line-In and Headphone Out ports.
6
2
1
3
ASUS Xonar Xense