D-Link DVC-1000 Manual page 48

Frequently Asked Question (continued)
6
How large will the image be?
As large as the TV screen. i2eye supports three screen formats. The
first is a picture-in-picture mode that has the incoming video covering
about half the television screen and the outbound video in a smaller
window. The second is full screen mode. This mode displays the incom-
ing video across the entire television screen. The third is connection
status mode. This mode displays the picture-in-picture mode and gives
you an idea of the upload and download speed.
7
Can I use the DVC-1000 with a non-D-Link directory service?
No. The DVC-1000 is designed to automatically connect to the D-Link
Directory Service. This is a free service and is available to anyone with
a DVC-1000. The Directory Service allows for calling another DVC-
1000 Videophone by using a phone number instead of using an IP
Address.
8
Do I need a PC to use i2eye?
i2eye is a complete standalone system that handles all the communications,
so you don't need a PC. Just connect it to the TV and broadband connection
and go. You can also use it with any PC with video input capabilities.
9
Can I connect i2eye without wires?
Yes, there is an optional DWL-810+ device that allows you to configure your
complete system without wires (note: you need a wireless router or access
point). The DWL-810+ bridges from i2eye's wired Ethernet connection to the
AirPlus wireless router or access point that is connected to the cable or DSL
modem .
1 0
How easy is i2eye to setup?
Very easy. When users first turn on i2eye they will be walked through a
Set-up Wizard that is designed to get the videophone up and working
quickly. The wizard asks for the information needed to connect to a
broadband Internet connection. Once the information is sent, i2eye will
connect to the D-Link i2eye server. The server will assign a 10-digit
"Internet telephone number" to the device. It will not be necessary to
work with cumbersome IP addresses when you want to communicate
using the i2eye.
48