Controls And Functions; Front Panel - Yamaha NP-S2000 Owner's Manual

Front panel

1
OFF
2 3
1 Power indicator
Lights up: This unit is turned on.
Lights up dimly: This unit is standby.
Off: This unit is turned off.
2 Power switch (
P.9)
Switches this unit between on/standby and off.
3 Foot (
P.7)
Remove the magnet foot to use the spikes. Also, you can
adjust the height of each foot by rotating it.
4 Remote control sensor (
Receives infrared signals from the remote control.
5 LINK indicator
Lights up: This unit is connected to the network and an IP
address has been assigned.
Blinks: This unit is connected to the network but an IP
address has not been assigned.
Off: This unit is not connected to the network.
20
En

CONTROLS AND FUNCTIONS

LINK
4 5
P.21)
SOURCE
6 7
6 Front panel display
Shows menu items or playback information.
7 SOURCE (
P.14)
Selects a source type.
8 RETURN (
P.14)
Shows the upper-level menu in the front panel display.
9 Jog dial (
P.14)
Rotate to select an item and press to confirm the selection.
SELECT
ENTER PUSH
RETURN
8 3 9