DGE-530T Gigabit Ethernet Adapter Card
•
Supports Wake-on-LAN
•
Full-duplex Gigabit Ethernet interface that delivers 2Gbps aggregate bandwidth
•
Support for half and full duplex at 10Mbps, half and full-duplex at 100Mbps, and full-duplex
operation at 1000Mbps
•
Support for full-duplex double network throughput
•
Support TCP/IP checksum generation and verification
•
Support for SNMP V1
•
Support for 802.3x flow control
•
Supports 802.1Q VLAN
•
Supports 802.1p Priority Tags
•
Supports a Cable Diagnostic Feature
•
Support for ACPI 2.0
•
One built-in RJ-45 connector
•
Auto-negotiation to the highest available speed
•
Four LED indicators: Link/Activity, Full Duplex, 1000Mbps, 100Mbps.
•
Low profile bracket
•
PCB size: 124mm x 51mm
•
Driver
support for:
†
√ Microsoft Windows Server 2003
√ Microsoft Windows XP
√ Microsoft Windows NT
√ Microsoft Windows ME
†
Check http://www.dlink.com for newest release of drivers.
NOTE: The driver for Microsoft Windows Server 2003 will be available in
an upcoming release of this product. Currently this driver is not supported.
√ Red Hat Linux 7.3 (kernel 2.4.18-3) or later
√ Microsoft Windows 2000
√ Microsoft Windows 98SE
√ Novell Netware 4.2/5.X/6.X/ ODI 1.11
2