Add User; Change User Password - D-Link DFL-700 Manual

Add User

Follow these steps to add a new user.
Step 1. Click on add after the type of
user you would like to add, Admin or
Read-only.
Step 2. Fill in User name; make sure
you are not trying to add one that
already exists.
Step 3. Specified what groups the user
should be a member of.
Step 3. Specify the password for the new user.
Click the Apply button below to apply the setting or click Cancel to discard changes.
Note: The user name and password should be at least six characters long. The user
name and password can contain numbers (0-9) and upper and lower case letters (A-Z, a-
z). Special characters and spaces are not allowed.

Change User Password

To change the password of a user click on the user name and you will see the following
screen.
Follow these steps to change a users
password.
Step 1. Click on the user you would like
to change level of.
Step 2. Enable the Change password
checkbox.
Step 3. Enter the new password twice.
Click the Apply button below to apply
the setting or click Cancel to discard
changes.
Note: The password should be at least six characters long. The password can contain
numbers (0-9) and upper and lower case letters (A-Z, a-z). Special characters and spaces
are not allowed.