D-Link DWL-520 Manual page 13

Configuration Utility (continued)
Link Info (continued)
Status: Displays the MAC Address of the Access Point that is associated
with the DWL-520+.
SSID: The Service Set Identifier is the name assigned to the wireless
network. The factory SSID setting is set to default.
TxRate: The factory setting is set to 11 Mbps; however, TxRate settings are
automatically determined by the DWL-520+ depending on the distance from
the access point.
Channel: Displays the channel information. By default, the channel is set to
6 and selection is automatically determined by the DWL-520+.
Link Quality / Signal Strength: Displays the Link Quality for the DWL-520+
wireless connection to the access point. The Signal Strength represents the
wireless signal between the access point and the DWL-520+. The
percentage coincides with the graphical bar.
Data Rate: Displays the statistics of data transmitted and received.
Rescan: Rescans the network for the Access Point with the greatest signal
strength and connects the DWL-520+ automatically.
Configuration
The Configuration screen displays the default settings for the DWL-520+.
13