D-Link AirPremier AG DWL-AG530 Manual page 39

Troubleshooting (continued)
Check that the Network Connection for the wireless client is
configured properly. Select AP (Infrastructure) when connecting
to an access point and select Ad-Hoc mode when connecting
without an access point. Double-click on the WLAN icon in the
taskbar > click on Configuration to change the settings for the
wireless adapter.
If Security is enabled, make sure that the correct encryption keys
are entered on both the DWL-AG530 and the access point. Double-
click on the WLAN icon in the taskbar > click Encryption. Check to
see that the key selected is set to the same key as other devices on
the network.
If SuperA/G is enabled, make sure that Turbo mode is enabled on
all Turbo mode compatible devices in your network, in order to
communicate.
7. How can I avoid connection problems using the DWL-AG530?
Move the DWL-AG530 and the access point or wireless router into
the same room and then test the wireless connection.
Change the channel of the access point.
Move devices within the line of sight.
* Due to DFS (Dynamic Frequency Selection), 5GHz Ad-Hoc mode is always disable in EEC countries.
39