Preparation Before Using This Unit; Turning On The Power - Yamaha TSX-10 Owner's Manual

PREPARATION BEFORE USING THIS UNIT

Turning on the power

1 To AC inlet
STANDBY/ON
6
En
Preparation before using this unit
Connect the power cable to the AC inlet of this unit
and an AC wall outlet.
2 To an AC wall outlet
STANDBY/ON Turn on this unit.
Press again to set this unit to the standby mode.
On the top panel
You can also perform the above operations on the top panel.
Turn on this unit.
y
• During the standby mode, the power consumption is reduced.
• You can display clock during the standby mode. Press and hold MUTE on the top panel
during the standby mode. Once "ECO ON" flashes in the front panel display, press MUTE
again to select "ECO OFF", and then leave for several seconds. To turn off the clock, select
"ECO ON".
• The memory back-up circuit prevents the stored data from being lost even if this unit is in
the standby mode. However, the stored data will be lost if the power cable is disconnected
from the AC wall outlet or if the power supply is cut off for more than one week.
INPUT/SNOOZE
SLEEP
POWER OFF
Set this unit to
the standby mode.