Connecting The Power Cord - Pioneer DMP-555 Operating Instructions Manual

4. Connecting to other devices
A Connecting to other mixers
Connect the AUDIO OUT and CARD MONITOR terminals on the unit with the Line In terminals or AUX terminals on the mixer.
(Do not use the Phono terminals. Otherwise the sound will become distorted and prevent normal playback.)
B Connecting to a stereo amplifier (when not using a DJ mixer)
Connect to the AUX input terminals.
Stereo amplifier
(Do not use the Phono input terminals.)
C Connecting to a component with a digital input terminal
CD recorder or amplifier
with digital inputs
÷ Set the Digital mode switch (DIGITAL OUT) to ON when using the digital output terminal.
NOTE:
When the Digital mode switch (DIGITAL OUT) is set to ON, the DJ functions (cue, loop, reloop, tempo adjust, Jog dial, Card mixing and Isolator) do not work. And the
muted pause mode is used instead of the audible pause mode.

5. Connecting the power cord

When all connections have been made, connect the power plug to an AC wall outlet or to a power receptacle on the rear panel of the amplifier.
6. Computer connection
When the provided USB cable is used to connect the Digital media player's USB connector to a computer's USB connector, the Digital media player's jog dial and TEMPO control
slider can be used to control the accessory software program "DJ Booth." The software (on CD-ROM) provided with the Digital media player must be installed on your computer
in order for your computer to recognize the Digital media player. For details, consult the software installation manual.
Computer
Supplied audio cable
Digital signal cable
Supplied USB cable
BEFORE OPERATIONS: CONNECTIONS
DMP-555
DMP-555
DMP-555
9
En