Table of Contents
Advertisement
Using the Configuration Utility
SECURITY
If an additional measure of security is desired on the wireless network, WEP
(Wired Equivalent Privacy) encryption can be enabled.
Select Enable to
activate encryption.
Select 64 Bit or 128
Bit WEP Key Length
Select WEP Key
Type: Character or
Hexadecimal
Select
Authentication Type:
Open, Shared or
Auto
Please note that all
devices must share the
same Encryption settings
to communicate on the
network.
Input 4 different Key
Settings in the fields
provided.
For 64 Bit WEP
encryption, you may
enter 5 characters in
the range of a-z and 0-
9 (for example:
MyKey); or a 10 digit
hexadecimal value in
the range A-F, a-f, and 0-9. (For example: 11AA22BB33).
For 128 Bit WEP encryption, you will enter 13 characters in the range of
a-z, A-Z and 0-9 (for example: MyKey12345678); or a 26 digit
hexadecimal number for 128-bit encryption. If the number is entered
incorrectly the function will not work.
After entering the WEP keys, choose the WEP key you wish to use and click
Apply for the configuration to take effect.
Advertisement
Table of Contents
