Warning Codes - Haier HWD 1500 User Manual

WARNING CODES

6) Warning codes for the HWD1500 unit.
Warning
Problem
code
Err1 Door Lock
Err2 Pump
Err5 Water supply
The
Err6 temperature
of air vent
Err7 Motor
Err8 Water supply
The dry
Err9 temperature
sensor
Water level
Err10
sensor
Water level is
Err12 abnormal in the
drying process
Err13 Unlock the door
Err14 Spin lopsidedly
7) Technical specifications for the HWD1500.
Power supply：
Max working current(A)
Water pressure(PSI)：
Washing power(W)：
=eason
Can not lock the door after 20s
The water can not drain the set
water level within 4 minutes
The water level can not reach
the setting water level within 8
minutes
Within 30 minutes of dry phase
there is 5 minutes in which the
temperature is not increasing
The feedback signal does not
change in 8 minutes during the
motor runs
The water is above the warning
level
Dryer sensor circuit problem
Water level sensor circuit
problem
The water is above the setting
water level during the drying
process
The door is open
Unbalance
120VAC 60Hz
12A
0.05~1MPa
350W
Action to
Solution
take
Warning and
Need Service
stop running
Clear the pump
Warning and
stop running
Need Service
Check if the water pressure
Warning and is low or stops supplying
stop running
Need Service
Warning and
Need Service
stop running
Warning and
Need Service
stop running
Warning and
Need Service
stop running
Warning and
Need Service
stop running
Warning and
Need Service
stop running
Check if the water outlet of
Warning and
the drainage and adjust it
stop running
and restart the machine
Warning and
Close the door
stop running
Spin low
Disperse the clothing evenly
speed and
in the tube
cancel drying
English
22