Default Settings - D-Link DWL-810 Owner's Manual

Connections
Ethernet Port – an RJ-45 jack
provides connection to a network
device using a Cat 5 Ethernet
cable. (Use the included
Cross-Over CAT5 cable when
connecting to another Ethernet
adapter, like the port in a gaming
console; use a Straight-Through
CAT5 cable when connecting to a
switch.)
Reset Button – press this button to revert to the factory default settings of
the DWL-810
Power Receptor – connect one end of the included 5V DC Power Adapter
into the power receptor on the DWL-810 and connect the other end of the
Power Adapter to a power outlet.
Category 5 is the most reliable grade of twisted-pair cable. It is either Straight-
Through cable or Cross-Over cable. Always check your installation instructions
to make sure that you have selected the correct type of Category 5 cable.
For the DWL-810, you will use Cross-Over cable to connect to a computer
for configuration and to connect to any device with an Ethernet adapter.
Use a Straight-Through cable to connect the DWL-810 directly to a switch.

Default Settings

Operating Mode
SSID
Channel
Transmission rates
Encryption
IP Address
IP Subnet
User Name
Password
Reset Button
Power Receptor
Ethernet Port
Ad-Hoc
default
6
Auto
Disabled
192.168.0.30
255.255.255.0
Admin (all lower case)
None (leave field blank)
6