D-Link DP-311U Manual page 16

Server Name: The name assigned to the Print Server.
Location: (optional) Input a comment indicating where the Print Server is
located.
Admin Contact:
Password: By default the DP-311U does not have a password. This is a security
risk; it is recommended that you enter a password for the Print Server.
Port Name: This is the assigned name for the USB port.
Description: (Optional) A brief description for the USB port.
Speed: Printer port speed, High or Low.
PJL Printer: This feature is used to support Hewlett-Packard PJL (Printer Job
Language) standard for bi-directional printing.
Connection Mode:
communicate directly with one another without using an access point or any
connection to a wired network. Infrastructure refers to an 802.11 network in which
wireless devices communicate with each other by first going through an Access
Point (AP) or wireless router.
ESS-ID: The workgroup name of your Wireless Network. All wireless devices must
all have the same SSID to communicate on the Wireless Network. All D-Link
Wireless devices have the default SSID of default, all lower case.
Wireless Channel:
here matches the setting on your access point.
Transmission Rate:
possible depending on your usage and environment.
WEP Key Encryption:
key. 128 bit WEP uses a 26 hexidecimal character key. The WEP encryption key
must match the WEP settings on your AP or wireless router to connect properly.
WEP Encryption:
Confirm WEP Key:
field.
(Optional) Administrator name for the Print Server.
Ad-Hoc refers to two or more 802.11b wireless devices that
Displays the channel information. Make sure your the setting
You can adjust the transmission rate to get the best signal
64 bit WEP encryption uses a 10 hexidecimal character
Enter the WEP key that you wish to use in this field.
After typing in your WEP key, confirm the WEP Key in this
16