Bios Setup Utility - Acer Aspire 1202 User Manual

62

BIOS Setup Utility

The BIOS Setup Utility is a hardware configuration program built into your computer's
BIOS (basic input/ouput system).
Your computer is already properly configured and optimized, and you do not need to
run this utility. However, if you encounter configuration problems, you may need to
run it. Please also refer to Chapter 6, Troubleshooting when a problem arises.
To activate the BIOS Setup Utility, press F2 during POST.
Main
System Time:
System Date:
Floppy Drive:
Hard Disk:
Quiet Boot:
Power on display:
LCD Display stretch:
System Memory:
Extended Memory:
BIOS Ver.
F1 Help
Esc Exit
Navigating the BIOS Setup Utility
There are six menu options: Main, System Devices, Security, Others, Boot and Exit.
Follow these instructions:
To choose a menu, use the cursor left/right keys ( ← → ).
•
To choose a parameter, use the cursor up/down keys ( ↑ ↓).
•
To change the value of a parameter, press F5 or F6.
•
Note: You can change the value of a parameter if it is enclosed in square brackets.
A plus sign (+) indicates the item has sub-items. Press Enter to expand this item.
•
System Devices Security
[11:21:00]
[09/11/2001]
1.44MB, 3 ½"
IBM-DJSA-220-(PM)
[Enabled]
[Auto-Selected]
[Enabled]
640 KB
113664 KB
V0.01
↑↓
Select Item F5/F6 Change Values
←→
Select Menu Enter Select > Sub-Menu
Others Boot Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Software