86
Setting the Boot drive sequence
Use the cursor up/down keys to select a boot device, then press
order. Items with a "+" sign can be further expanded.
Note: To use the "D2D Recovery", first enable "System Boot From Hard Disk
Recovery" (see "Advanced" on page 78), then change the boot sequence to make
D2D Recovery the first in the list. The "D2D Recovery" option is not available if
"System Boot From Hard Disk Recovery" is disabled.
Exit
This menu contains the exit options.
Parameter
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Description
Saves your changes and exits the BIOS Utility.
Discards your changes and exits the BIOS Utility.
Loads default settings for all setup parameters.
Software
−
+
or
to change its