D-Link DKVM-IP1 Manual page 35

The following information has to be given to mount the image properly:
Share host The server name, or its IP address.
Share name The name of the share to be used.
Path to image The path of the image file on the share.
User (optional) If necessary, specify the user name for the share named before. If
unspecified, and a guest account is activated, this guest account
information will be used as your login.
Password (optional) If necessary, specify the password for the given user name.
To register the specified file image and its location click on the button "Set".
The specified image file is supposed to be accessible from the DKVM-IP1 switch. The
information above has to be given from the point of view of the DKVM-IP1 switch. It is
important to specify correct IP addresses, and device names. Otherwise, DKVM-IP1 switch
may not be able to access the referenced image file.
Furthermore, the specified share has to be configured correctly. Therefore, administrative
permissions are required. As a regular user you may not have these permissions. You should
Figure 6-6. Selecting CD ROM
Figure 6-7. Select Windows Share
32