Hands Free Car Kit - Motorola 3200 User Manual

ACCESSORIES AND OPTIONS
3. Orient the connector of the Battery Saver
coil cord so that it lines up correctly with
the connector of your phone and insert it
until the locking devices click into place.
4. Plug the other end of the Battery Saver
into your vehicle's cigarette lighter socket.
An LED indicator on the Battery Saver
case indicates that the battery is being
charged and will remain on while the
battery is charging.

HANDS FREE CAR KIT

HANDS FREE CAR KIT
The Hands Free Car Kit provides:
• Full Duplex Hands Free operation.
• Power to the phone from the car's battery.
• Connection to an outside antenna.
• Constant illumination of the keypad while
car ignition is on.
• In car battery charging.
Note: If your car kit has been installed with
Ignition Sense Activation, the telephone will
switch on and off with the car's ignition switch,
as long as the telephone was switched on
before the ignition was last switched off.
Note: When your telephone is connected to
the Hands Free Car Kit, you cannot use the
battery strength indicator feature to check the
charge level of the battery.
Page 73
3