Using Your C51 To Place Mobile Device Calls - Motorola C51 COMMUNICATION SYSTEM-SD7505 User Manual

Using Your C51 to Place Mobile Device Calls

The CONNECT TO feature of your C51 system allows you to choose a line for your
outbound calls. Your default line for outbound calls is your home telephone line ("
Line
"). Your C51 system gives you the option to temporarily or permantly change the
default line to your SD7505.
To temporarily CONNECT TO your mobile device, instead of the
1. Press CONNECT TO from any C51 cordless handset or cordless phone base.
2. Scroll to and select your SD7505. Your C51 cordless handset or cordless phone
base will now display the name of the SD7505, instead of
make calls through your mobile device.
NOTE: If left idle for 60 seconds, the line reverts back to the
Once connected to the SD7505, you can place a call through your mobile device, by:
•
Dialing the number you want to call, and pressing ON/FLASH.
•
Choosing a phone number from a call log, and pressing ON/FLASH.
•
Choosing a phone number from a
ON/FLASH.
NOTE: While a call is active on the mobile device line, the SD7505 Bluetooth LED flashes
every six seconds instead of blinking every three seconds.
Base Line
PRIVATE SHARED
or phonebook, and pressing
Base
Base Line
:
Base Line
. You can now
setting.
13