Motorola EASY START KIT HMEZ1000 - QUICK START PACKAGING Quick Start Manual page 4

HMGW1070 USB Gateway
Installing the Software and USB Gateway
Do not connect your USB Gateway to your computer until the Installation Wizard instructs you to do so.
1 Insert the enclosed Motorola Home Monitoring & Control System CD in the CD-ROM drive. The
Motorola Home Monitor Installation Wizard is displayed.
a If the application does not appear or autorun, right-click the Start button and select Explore.
b Select your CD-ROM and double-click to open.
c Double-click Launch.exe to start the application.
2 Click Next. The Choose Destination Location window is displayed.
3 Click Next to accept the default destination folder or click Browse to select a new one. After you
click Next, the Select Program Folder window is displayed.
4 Accept the default folder or choose a new one. Click Next. The file installation begins. After a few
moments, the Install Motorola Home Monitor Hardware and Driver window is displayed.
5 Remove the back cover from your USB Gateway.
Pull back from the top and
then down. The cover will
separate from
6 Plug the AC adapter into the Power port on the USB Gateway and into an AC wall outlet. This
powers on your USB Gateway.
7 Connect the USB cable on the Gateway to the USB port on your computer. Windows automatically
installs the required drivers.
8 If desired, replace the USB Gateway back cover.
9 Once the driver installation is complete, click Next. The Software installation was successful
window is displayed. Be sure the checkbox "Launch Motorola Home Monitor" is selected.
10 Click Finish. The Motorola Setup Wizard is displayed. Follow the on-screen instructions for
installing the Motorola Home Monitor software.
the unit.
USB port on
PC (step 7)
AC adapter
(step 6)
3
Quick Start Guide