Brother DCP-7030 Software User's Manual page 48

Brother Scanner Utility
The Brother Scanner Utility is used for configuring the WIA scanner driver for resolutions greater than
1200 dpi and for changing the paper size. If you want to set Legal size as the default size, use this utility to
change the setting. You must restart your PC for the new settings to take effect.
Running the utility
You can run the utility by choosing the Scanner Utility located in the
Start/All Programs/Brother/MFC-XXXX (or DCP-XXXX) (where XXXX is your model name)/
Scanner Settings/Scanner Utility.
Note
If you scan the document at a resolution greater than 1200 dpi, the file size may be very large. Make sure
that you have enough memory and hard disk space for the size of the file you are trying to scan. If you do
not have enough memory or hard disk space then your PC may freeze and you could lose your file.
Note
®
For Windows Vista
• For users who have administrator rights: Click Allow.
the User Account Control screen appears, do the following.
Scanning
2
2
41