Using An Ac Power Source - Canon Powershot Pro70 Hardware Manual

Using an AC Power Source

It is convenient to power the camera with the
DC coupler and compact power adapter
connected to an AC power source when
operating indoors. This is particularly
recommended when the camera is connected
to a computer and exchanging files, a
relatively power-intensive process.
• The compact power adapter cannot
charge the battery pack while it is being
used as an AC power source.
• Unplug the compact power adapter
from the electrical outlet after use.
• The compact power adapter can only be
used as an AC power source for
products specified for use with Battery
Pack NB-4H.
1. Set the mode dial to lock.
2. Connect the power cord to the
compact power adapter and plug it
into the electrical outlet.
28
3. Install DC Coupler DR-200 in the
camera as shown below and attach it
to the DC terminal on the compact
power adapter.
The camera indicator will shine red,
indicating that the camera is ready to use.
DC Coupler
DR-200
Camera
Indicator
Compact Power Adapter
CA-PS200
Cable Cover
DC
Terminal