Setting Up The Dsa-3100 - D-Link DSA-3100 Manual

Setting up the DSA-3100

Make sure the DSA-3100 unit is not connected to the power
adapter and is powered OFF.
WAN port connection
Use 10/100BaseT connections to connect the unmanaged network.
The unmanaged network's interface may be the ADSL router's LAN
port, cable modem's LAN port or Intranet switch port.
Private LAN port connection
Use to connect to a local network. All ports are auto-mdix, which means
that you can use a straight-through or a crossover cable for connections.
Public LAN port connection
Use to connect to a switch or an access point for Hotspot access. All ports
are auto-mdix, which means that you can use a straight-through or a
crossover cable for connections.
Power ON
Connect the supplied power adapter to the DSA-3100 and insert the
plug on the other end into an electric outlet.
Check the LEDs
The power LED and WAN LED should be ON, if the
corresponding WAN port is connected to an active cable/DSL
modem or T1 line.
The corresponding local network or authentication indicator should
be ON if a network device is connected to the private network port or
the public network port.
11