Removing The Floppy Drive - HP Brio BA Upgrade Manual

Replacing the Floppy Drive

Removing the Floppy Drive

Removing the Floppy Drive
You will need to have removed the cover. Refer to "Removing the Cover" on page 8.
For your safety, disconnect the power cord and all external cables.
Caution
1 Undo the floppy drive bay fixing screw.
2 Pull the bay towards the back of the computer until it is released from its
mountings.
3 Undo the four screws
4 Remove the two cables form the back of the drive.
5 Slide the drive out of the bay.
18
, two on each side.