Copyright Notice The information in this document is subject to change without notice. COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. This document contains information protected by copyright.
Page 4
EULA for Microsoft® Windows® CE Operating System for Windows-based Terminal Devices IMPORTANT—READ CAREFULLY This End User License Agreement (EULA) is a legal agreement between you (either an individual or a single entity) and the manufacturer (MANUFACTURER) of the special purpose computing device (SYSTEM) you acquired which includes certain Microsoft software product(s) installed on the SYSTEM and/or included in the SYSTEM package (SOFTWARE).
Page 5
• Use of Windows CE Operating System for Windows-based Terminal Devices with Microsoft Windows NT Server, Terminal Server Edition If the SOFTWARE is Windows CE operating system for Windows-based Terminal devices, the following special provisions apply. In order to use the SYSTEM in connection with Windows NT Server, Terminal Server Edition, you must possess (1) a Client Access License for Windows NT Server, Terminal Server Edition and (2) an end user license for Windows NT Workstation or an...
Page 6
• Single EULA The package for the SYSTEM SOFTWARE may contain multiple versions of this EULA, such as multiple translations and/or multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple versions of the EULA, you are licensed to use only one (1) copy of the SYSTEM SOFTWARE.
Page 7
viii 5. Product Support Product support for the SOFTWARE is not provided by MS, its parent corporation, Microsoft Corporation, or their affiliates or subsidiaries. For product support, please refer to MANUFACTURER’s support number provided in the documentation for the SYSTEM. Should you have any questions concerning this EULA, or if you desire to contact MANUFACTURER for any other reason, please refer to the address provided in the documentation for the SYSTEM.
Page 8
8. Limited Warranty • Limited Warranty MANUFACTURER warrants that the SOFTWARE will perform substantially in accordance with the accompanying written materials for a period of ninety (90) days from the date of receipt. Any implied warranties on the SOFTWARE are limited to ninety (90) days.
Page 9
If this EULA was acquired outside the United States, then local law may apply. Should you have any questions concerning this EULA, please contact the MANUFACTURER of your SYSTEM. U.S. GOVERNMENT RESTRICTED RIGHTS The SOFTWARE and documentation are provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs (c)(1) and (2) of the...
FCC Statement This equipment has been tested and found to comply with the limits for either Class A or Class B digital devices (refer to “Terminal Requirements Compliance”), pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Class A This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicté...
Page 12
xiii Cable Notice The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or host devices. Failure to do so may cause interference and violate FCC and international regulations for electromagnetic interference.
Page 13
License Agreement YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE USING THIS SOFTWARE (TOGETHER WITH ANY SUPPLIED DOCUMENTATION, HEREAFTER "SOFTWARE"), WHICH IS OWNED BY THE MANUFACTURER OR ITS LICENSORS. USING THIS SOFTWARE INDICATES YOUR ACCEPTANCE OF THE FOLLOWING TERMS AND CONDITIONS.
Page 14
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Limit of Liability UNDER NO CIRCUMSTANCES SHALL MANUFACTURER BE LIABLE FOR LOSS OF DATA, COST OF COVER, OR ANY INCIDENTAL OR...
Contents Patents iii About the Administrators Guide Guide Overview xxv Guide Conventions xxvi Text Format xxvi User Interface Menu Control xxvii Terminal Installation Model T1000 Terminal Installation Locating the Terminal 3 Connecting the Terminal 3 Mounting the Terminal 7 Freestanding Desktop Mounting 7 Turning On the Terminal 8 Model T1010 Terminal Installation Locating the Terminal 9...
Page 16
xviii Using the Setup Wizard 17 Changing Terminal Properties Using the Terminal Properties Dialog Box 39 Resetting to Factory Defaults 40 Terminal Settings Change Dialog Box 41 Network Configuration Using the Network Properties Sheet 43 Web Browser Using the Web Properties Sheet 47 Additional Terminal Applications Using the Apps Properties Sheet 51 ICA Client Settings...
Page 17
Using the Device Properties Dialog Box 90 Port Settings 91 Call Options 92 Dial-Up TCP/IP Settings and Security Using the TCP/IP Settings Dialog Box 93 Using the Security Settings Dialog Box 94 Dial-Up Scripts Using the Dial-Up Scripts Dialog Boxes 97 RDP Connections Using the WTS Connection Wizard 101 Terminal Emulation Connections...
Page 18
Using the Net Connections Properties Sheet 141 Using the Application Properties Sheet 142 External Devices Devices Properties Devices Properties Sheet 147 Managing Network Adapters Using the Adapters Configuration Dialog Box 152 IP Address Properties Sheet 153 Name Server Properties Sheet 154 Add-On Add-on Dialog Box Uninstall Tab 155 Add-on Dialog Box System Tab 157...
Page 19
PC Card Adapters for Token Ring Networks Using the RACORE - Token Ring Adapter Settings Dialog Box 187 SNTP Client Using the SNTP Client Dialog Box 189 PC Card Adapters for Wireless Networks Using the WaveLAN/IEEE Settings Dialog Box 191 Basic Properties Sheet 191 Advanced Properties 193 Power Management 195...
Page 20
xxii Client Security Security Properties Using the Security Properties Sheet 227 Terminal Accounts Guest Accounts 233 User Accounts 234 Administrator Accounts 234 Using Terminal Accounts 234 Creating Terminal Accounts Using the Add User Account Dialog Box 237 Modifying and Deleting Terminal Accounts Using the Modify User Account Dialog Box 243 Deleting Terminal Accounts 248 Terminal Login...
About the Administrators Guide The T1000/T1010 Series Windows-based Terminal Administrators Guide contains the information you will need to install, configure, connect, and troubleshoot a WBT (Windows-based Terminal). This guide is written for network system administrators and covers the Models T1000 and T1010 terminals. Guide Overview The administrators guide consists of the following chapters: •...
xxvi Guide Conventions Text Format Table 1 lists the text format conventions used in this document. Table 1 Text Format Conventions Convention Where Used Italic New term, book title, or emphasis. Bold Screen display, keycaps, and user input. This convention indicates a note. A note adds Note information.
xxvii User Interface Menu Control Table 2 describes the command buttons used for user interface menu control on a T1000/T1010 WBT. Table 2 User Interface Menu Control Command Button Function Found in the upper right corner of a dialog box. Click on this command button to quit a dialog box or properties sheet without saving changes.
Model T1000 Terminal Installation This section discusses the procedures for installing the T1000 terminal. Note A keyboard and AC power cord are supplied with U.S. models only. Locating the Terminal Position the terminal on a clean, horizontal surface that is free from vibration and out of direct sunlight.
Terminal Installation Figure 1-1 T1000 Terminal Back Panel Connectors...
Page 28
Terminal Installation The following table summarizes the back panel connectors’ functions. Table 1-1 T1000 Terminal Back Panel Connectors Connector Description Network Connector LAN connector, 10/100Base-T Com1 Serial port 1. Can be connected to: • External modem. • Local server. • Local serial printer.
Terminal Installation Proceed as follows to connect the terminal. (If necessary, remove the desktop mounting stand (one Phillips-head screw on the bottom.) Note Before connecting the cables, decide which mounting configuration will be used and ensure that the cables are of the correct lengths. If permanent desktop configuration is to be used, drill the desktop mounting holes before connecting the cables.
Terminal Installation Mounting the Terminal Instructions for mounting your terminal are provided in the following paragraphs. Freestanding Desktop Mounting The terminal is shipped with a desktop mounting stand attached so it can immediately be put into desktop operation. The mounting stand is weighted and equipped with non-skid feet.
Terminal Installation Turning On the Terminal Once the terminal is installed and all back panel connections have been made, power it up. It is powered-up and operating when the power supply is connected to AC power; to toggle the display off or on, press and release the power button. Note If the button is continuously depressed for 3-5 seconds, the unit will perform a hard boot.
Model T1010 Terminal Installation This section discusses the procedures for installing the T1010 terminal. The following sections describe how to connect and set up the terminals. Note A keyboard and AC power cord are supplied with U.S. models only. Locating the Terminal Position the terminal on a clean, horizontal surface that is free from vibration and out of direct sunlight.
Terminal Installation Figure 2-1 T1010 Terminal Back Panel Connectors...
Page 34
Terminal Installation The following table summarizes the back panel connectors’ functions. Table 2-1 T1010 Terminal Back Panel Connectors Connector Description Network Connector LAN connector, 10/100Base-T Com1 Serial port 1. Can be connected to: • External modem. • Local server. • Local serial printer.
Terminal Installation Proceed as follows to connect the terminal. (If necessary, remove the desktop mounting stand (one Phillips-head screw on the bottom.) Note Before connecting the cables ensure that the cables are of the correct lengths. If permanent desktop is to be used, drill the desktop mounting holes before connecting the cables.
Terminal Installation Mounting the Terminal Instructions for mounting your terminal are provided in the following paragraphs. Freestanding Desktop Mounting The terminal is shipped with a desktop mounting stand attached so it can immediately be put into desktop operation. The mounting stand is weighted and equipped with non-skid feet.
Terminal Installation Turning On the Terminal Once the terminal is installed and all back panel connections have been made, power it up. It is powered-up and operating when the power supply is connected to AC power; to toggle the display off or on, press and release the power button. Note If the button is continuously depressed for 3-5 seconds, the unit will perform a hard boot.
Initial Terminal Setup The Setup Wizard is used for initial setup of the terminal’s properties. The wizard runs when: • You power-up your terminal for the first time. • An image has been downloaded to your terminal that is older than the image currently in use.
Advanced User Interface Figure 3-1 Welcome/Countdown Dialog Box The Welcome/Countdown dialog box provides product information and a countdown. • Click on Next during the countdown before it reaches zero to continue with the wizard. • Let the count go to zero to auto-configure the terminal.
Advanced User Interface Figure 3-2 IP Address Dialog Box Note Contact the network administrator if a message appears in the box indicating that no network services were found. It may be that the network is not connected to the terminal or the network services are not configured.
Advanced User Interface Figure 3-3 Specify an IP Address Dialog Box Enter the addressing information requested in the fields provided (by default the fields are blank). Click on Next to go to the Optional Information dialog box (Figure 3-4).
Advanced User Interface Figure 3-4 Optional Information Dialog Box Check a box to enable name resolution: • Enable DNS - Enables Domain Name Services • Enable WINS - Enables Windows Internet Naming Services Enter the information in the text fields that are active. By default the check boxes are unselected and the text fields are inactive.
Advanced User Interface Figure 3-5 Desktop and Keyboard Settings Dialog Box...
Page 45
Advanced User Interface The following table lists the functions of the Desktop and Keyboard Settings dialog box. Table 3-1 Desktop and Keyboard Settings Dialog Box Function Description Desktop Area and Refresh Frequency area: Resolution drop-down list Select a resolution from the list. Selections are: •...
Page 46
Advanced User Interface Table 3-1 Desktop and Keyboard Settings Dialog Box, Continued Function Description Clicking Ok displays a color test pattern. After the test pattern closes, respond to the prompt(s) to accept or reject the new settings. Keyboard area Select the keyboard nationality in the Locale drop-down list box.
Advanced User Interface After making a new selection or accepting the default, click on Next ro go to the Browser Setup dialog box. Figure 3-6 Browser Setup Dialog Box Select whether or not to set up a local browser, and click Next to the next step. If you selected Yes, the Browser URLs dialog box (Figure 3-7) displays.
Advanced User Interface Figure 3-7 Browser URLs Dialog Box Type the URLs for the Home and Search pages, or accept the defaults, and click Next to continue.
Advanced User Interface Figure 3-9 History and Favorites Dialog Box Uncheck the boxes or accept the defaults (checked) for the indicated selections, and click Next to continue.
Page 51
Advanced User Interface Figure 3-10 Proxy Server Dialog Box If your terminal accesses the Internet through a proxy server, check the Use proxy server box and make the required entries in the now-enabled text and check boxes, and click Next to continue to the Local Printer Setup dialog box (Figure 3-11).
Page 52
Advanced User Interface Figure 3-11 Local Printer Setup Dialog Box The Local Printer Setup dialog box displays. If you want to set up a printer connected locally to your terminal, select Yes and the dialog boxes that follow will prompt you for printer information. Note This local printer setup applies only to RDP connections.
Page 53
Advanced User Interface Figure 3-12 Select Printer Port Dialog Box In the Select Printer Port dialog box, select the port to which the printer is connected and click on Next to go to the next step.
Page 54
Advanced User Interface Figure 3-13 Select Printer Model Dialog Box In the Select the Printer Model dialog box, select the printer model from the list and click on Next to go to the next step.
Page 55
Advanced User Interface Figure 3-14 Printer Name Dialog Box In the Name Your Printer dialog box, enter a name by which to refer to your printer and click on Next to go to the next step.
Advanced User Interface Figure 3-15 Default Printer Dialog Box In the Set Default Printer dialog box, select whether or not you want your Windows-based programs to use this printer as the default printer (Yes is the default selection). Click on Next to go to the next step.
Advanced User Interface Figure 3-16 Configure Another Printer Dialog Box If you have another printer connected to a different port on your terminal, select Yes in the Configure another printer dialog box. Click on Next to go to the next step. If you selected Yes, the printer setup process will repeat.
Page 58
Advanced User Interface Figure 3-17 Finish Dialog Box The Finish dialog box is informational. Click on the Finish command button to apply your selections and quit the Setup Wizard. After the Setup Wizard closes, the Terminal Settings Change dialog box displays.
Advanced User Interface Figure 3-18 Terminal Settings Change Dialog Box When you click on Restart, the terminal will go through the boot process and restart in the normal operating mode. If you want to change any of the selections after you restart, press F2 to open the Terminal Properties dialog box (see “Changing Terminal Properties”...
Changing Terminal Properties Terminal properties can be changed or reconfigured at any time during normal terminal operation using the Terminal Properties dialog box. Figure 4-1 shows this dialog box. Using the Terminal Properties Dialog Box Invoke the Terminal Properties dialog box by pressing the F2 key from the Connection Manager.
Advanced User Interface Figure 4-1 Terminal Properties Dialog Box Note The amount of available RAM may differ between terminal models. Resetting to Factory Defaults Proceed as follows: 1. Click on the General tab of the Terminal Properties dialog box.
Advanced User Interface 2. Click on the Reset the Terminal to Factory Default Property Settings check box. Figure 4-2 shows the System Settings Change dialog box that displays. 3. Click on Yes to start the reset process. The terminal will restart with the factory defaults in effect.
Page 63
Advanced User Interface Figure 4-3 Terminal Settings Change Dialog Box This dialog box contains the Restart command button. The terminal must be restarted in order for your new settings to take effect. Click on Restart to restart the terminal. The Connection Manager displays. See “Connections Management” for detailed information about configuring and making terminal connections.
Network Configuration The Network properties sheet lets you configure your network. See Figure 5-1 to view this properties sheet. Using the Network Properties Sheet To invoke this properties sheet: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Network tab.
Advanced User Interface Figure 5-1 Network Properties Sheet The following table discusses the functions of the Network properties sheet.
Page 66
Advanced User Interface Table 5-1 Network Properties Sheet Function Description Obtain an Address from a Click on this radio button to enable DHCP addressing. An IP DHCP Server address will be automatically assigned to your terminal by the DHCP server. Specify an IP Address Use this group box to enter a specific IP address.
Page 67
Advanced User Interface Table 5-1 Network Properties Sheet, Continued Function Description Advanced Network The Advanced Network command button is enabled if Specify an IP Address is selected or if a DHCP server was detected on start-up or and Obtain an IP address from a DHCP server is selected.
Web Browser The Web properties (Figure 6-1) sheet lets you configure the Internet Explorer browser. Note System time should be set accurately for cookies to work properly for some Web pages. Use of a time server is preferred. See “SNTP Client” in External Devices for information about synchronizing system time to a time server.
Advanced User Interface Figure 6-1 Web Properties Sheet Table 6-1 discusses the functions of the Web properties sheet.
Page 70
Advanced User Interface Table 6-1 Web Properties Sheet Function Description Home page text box Enter the URL of the Web page that will open initially upon launching the Browser. Search page text box Enter the URL of the search engine home Web page or a Web page that has links to a variety of search engines.
Additional Terminal Applications The Apps properties sheet contains functions for ICA, RDP, DHCP, and SNMP management options. See Figure 7-1. Using the Apps Properties Sheet Figure 7-1 shows this properties sheet. To invoke the Apps properties sheet: 1. Press F2 to invoke the Terminal Properties dialog box. 2.
Advanced User Interface Figure 7-1 Apps Properties Sheet) Table 7-1 Apps Properties Sheet Function Description Global Settings Group box used to manage ICA sessions. ICA Client Settings Click on the ICA Client Settings command button in the Global Settings group box. See “ICA Client Settings”...
Page 74
Advanced User Interface Table 7-1 Apps Properties Sheet, Continued Function Description SNMP Update Check this box to enable terminal firmware updates Enable through SNMP. SNMP Network... Use this command button to invoke the SNMP Network Administration dialog box. See “SNMP Firmware Upgrades”...
ICA Client Settings ICA client settings are handled in the Global ICA Client Settings dialog box. This dialog box is invoked through the Apps properties sheet found in the Terminal Properties dialog box. See “Additional Terminal Applications” for detailed information about the Apps properties sheet. Figure 8-1 shows the Global ICA Settings dialog box.
Advanced User Interface Using the Global ICA Client Settings Dialog Box To invoke the Global ICA Settings dialog box: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Apps tab in the Terminal Properties dialog box. 3.
Advanced User Interface Table 8-1 Default Hotkeys Properties Sheet, Continued Function Description Alt+Esc This hotkey cycles the focus through the minimized icons. Alt+Tab This hotkey cycles sequentially through applications that are open. A window appears to display the applications as you cycle through them. Alt+Backtab This hotkey cycles sequentially through applications that are open in a session, but in the opposite direction.
Page 78
Advanced User Interface Table 8-2 Preferences Properties Sheet Function Description Serial Number This is the serial number of your ICA Client software. This field is only necessary when you are using the ICA Windows CE Client with a product such as WinFrame Host/Terminal, which requires each client to have a Citrix PC Client Pack serial number in order to connect to the server.
Advanced User Interface Table 8-2 Preferences Properties Sheet, Continued Function Description Client Name This text box allows you to change the client name of your client device. The Citrix server uses the client name to uniquely identify resources (such as mapped printers) associated with a given client device.
Advanced User Interface Figure 8-3 Server Location Properties Sheet The following table describes each of the functions of this sheet. Table 8-3 Server Location Properties Sheet Function Description Click on this command button to open the Add Server Address dialog box. The server is added to the selected server group.
Advanced User Interface Table 8-3 Server Location Properties Sheet, Continued Function Description Server Group Use this drop-down list to select whether the servers entered in the Address List field belong to your Primary, first backup (Backup 1), or second backup (Backup 2) group.
Page 82
Advanced User Interface Table 8-4 Firewall Settings Properties Sheet Function Description Use Alternate Address Through By default the box is not checked. Firewalls SOCKS Use this group box to enable and configure SOCKS protocol. Connect Via SOCKS Proxy Check this box to enable a SOCKS proxy connection.
Advanced User Interface Setting Up a PNLite PNLite is an ICA connection mode that enables the terminal to connect to applications available on a Citrix server without having to configure connections for each published application. Note Refer to “NFuse Server Configuration Requirements” for an explanation of the differences between the methods of accessing published applications via the NFuse server and limitations on the NFuse server...
Page 84
Advanced User Interface The following table describes each of the functions of this sheet. Table 8-5 PNLite Properties Sheet Function Description Enable PNLite Check to enable the PNLite application. Server area Enter the address and port number of the NFuse server in the Address and port of NFuse server text boxes.
Creating New Connections The New Connection dialog box is used to create new connections. Figure 9-1 shows the New Connection dialog box. Figure 9-1 New Connection Dialog Box Using the New Connection Dialog Box To invoke the dialog box: 1. Click on the Configure tab in the Connection Manager dialog box. 2.
Connection Configuration Choosing a Connection Protocol The following table describes the differences between the connections available with your WBT. Table 9-1 New Connection Dialog Box Connection Protocol Description Citrix ICA Client ICA (Independent Computing Architecture) protocol, which connects to an ICA (Winframe/Metaframe) server.
Connection Configuration Note A Use Printer Configuration Utility check box is encountered in two places: (1) Connection Manager (Select an ICA Connection) | Edit | Edit Connection Details | Options tab, and (2) Connection Manager | Add | (Select Citrix ICA Client | Wizard leading to Printing, Compression, Cache, Encryption and Sound dialog box.
Page 89
Connection Configuration The following table describes the functions of this dialog box. Table 9-2 Connection Startup Dialog Box Function Description Make the Selected Connection Your Click this radio button to use the Default Connection connection you selected in the Connection Manager as the default connection.
ICA Connections Use the Specify Connection Type dialog box to start configuring an ICA connection. The ICA protocol connects you to a server running Citrix WinFrame or MetaFrame. Using the ICA Connections Wizard When the New Connection dialog box is open (see “Creating New Connections”): 1.
Connection Configuration Figure 10-1 Specify Connection Type Dialog Box Network Connections Select Network Connection, then click on the Next button. A Citrix search message displays: Figure 10-2 Citrix Search Message If the connection is found, the following sequence of dialog boxes displays. Use them to set up your network ICA connection.
Connection Configuration Figure 10-3 Select a Citrix Server or Published Application Dialog Box To use the Select a Server or Published Application dialog box: 1. Click on either Citrix Server or Published Application. 2. Select a server or an application from the drop-down scroll list, or type the information in the text entry box.
Connection Configuration Figure 10-4 Server Location Dialog Box 3. If you want to add a server name or IP address, click on the Add command button to invoke the Add Server Address dialog box. Figure 10-5 Add Server Address Dialog Box 4.
Connection Configuration Figure 10-6 Select a Title for the ICA Connection Dialog Box Enter a connection in the text box in the Select a Title for the ICA Connection dialog box, then click on Finish. Figure 10-7 Specify an Application Dialog Box To use the Specify an Application dialog box: 1.
Connection Configuration Figure 10-8 Specify Logon Information Dialog Box To use the Specify Logon Information dialog box: 1. If needed, enter a user name, a password, and a domain for connecting to an application. 2. Click on Next. Figure 10-9 Select Window Options Dialog Box...
Page 96
Connection Configuration To use the Select Window Options dialog box: 1. Click on the desired number of colors to display, 16, 256, (or Thousands). Two or three radio buttons are displayed depending on the pallette selected. If the terminal Color Palette (Display properties sheet in Terminal Properties dialog box) is 256 colors, radio buttons for 16 or 256 colors are displayed.
Connection Configuration SpeedScreen is a latency reduction feature that enhances the user’s experience on slower network connections. It echos local text to accelerate display of input text on the terminal and provides visual feedback for mouse clicks to show that the user’s input is being processed. d.
Connection Configuration Dial-In Connection Note This section applies only to the SE Model terminals. Choose Dial-In Connection, then click on the Next button. The following sequence of dialog boxes displays. Use them to set up your dial-in ICA connection. Figure 10-12 Dial-In Devices Dialog Box To use the Dial-In Devices dialog box: 1.
Dial-Up Connections Use the Dial-Up Configuration Wizard to configure a dial-up connection. Dial-up connections use a modem and PPP to connect to a server. Using the Dial-Up Configuration Wizard From the New Connection dialog box (see “Creating New Connections”): 1. Use the drop-down scroll list to select Dial-Up Client. 2.
Page 100
Connection Configuration Figure 11-1 Dial-Up Configuration Wizard 1 To use the first dialog box: 1. Enter a name for your dial-up connection (a maximum of 20 characters but not <>()[]/\.*?:",| ). 2. Click on Next.
Connection Configuration Figure 11-2 Dial-Up Configuration Wizard 2 To use the second dialog box of the wizard: 1. Select from the Serial Port drop-down scroll list one of the following: a. A modem connection such as Hayes Compatible on Com1. b.
Page 102
Connection Configuration 5. Click on the TCP/IP Settings command button to open the TCP/IP Settings dialog box. See “Dial-Up TCP/IP Settings and Security” for details about this dialog box. 6. Click on the Security command button to open the Security Settings dialog box.
Dial-Up Dialing Properties and Configuration The following sections provide information about some of the elements of the Dial-Up Configuration Wizard. This chapter covers dialing properties and device properties. Dialing properties are set using the Dialing Properties dialog box (Figure 12-1). Device properties are set using the Device Properties dialog box (Figure 12-2).
Connection Configuration Figure 12-1 Dialing Properties Dialog Box The following table discusses the functions of the dialog box.
Page 106
Connection Configuration Table 12-1 Dialing Properties Dialog Box Function Description Local Settings Set local dialing locale and dialing type in this group box. Local Area Code Enter the local area code that you want to use. Local Country Code Enter the local country code of the country to which you are dialing.
Connection Configuration Table 12-1 Dialing Properties Dialog Box, Continued Function Description Dialing Patterns Use this group box to set your modem’s dialing patterns. Local Calls Dialing Enter the local call dialing pattern. The default is 9,G. Local Long Distance Calls Dialing Enter the long distance call dialing pattern.
Connection Configuration The Device Properties dialog box contains two properties sheets: • Port Settings • Call Options The following sections discuss these properties sheets. Port Settings See Figure 12-2 to view the Port Settings properties sheet. It is the default of the Device Properties dialog box.
Connection Configuration Call Options Click on the Call Options tab to invoke the Call Options properties sheet. Figure 12-3 Call Options Properties Sheet The following table discusses the functions of this properties sheet. Table 12-3 Call Options Properties Sheet Function Description Call Setup Use this group box to configure the following call...
Dial-Up TCP/IP Settings and Security The following sections provide information about some of the elements of the Dial-Up Configuration Wizard. This chapter covers TCP/IP settings and dial-up security. Using the TCP/IP Settings Dialog Box Click on the TCP/IP Settings command button in the second dialog box of the Dial-Up Configuration Wizard to set TCP/IP dial-up settings.
Connection Configuration The following table discusses the functions in this dialog box. Table 13-1 TCP/IP Settings Dialog Box Function Description Use Software Compression Click on this check box to enable this function. By default, this function is activated and enabled. Use IP Header Compression Click on this check box to enable Use IP Header Compression.
Connection Configuration Figure 13-2 Security Settings Dialog Box The following table discusses the functions in this dialog box. Table 13-2 Security Settings Dialog Box Function Description Accept Any Authentication Click on this radio button to set your Including Clear Text (default) terminal to accept any authentication including clear text.
Dial-Up Scripts Dial-up RAS (Remote Access Services) scripts are enabled from the Dial-Up Configuration Wizard (see “Dial-Up Connections”). RAS facilitates PPP communications between the terminal (based on Windows CE) and other non-Windows operating systems. Using the Dial-Up Scripts Dialog Boxes Dial-up scripts dialog boxes are accessed by checking the Enable RAS script box and pressing the Script command button in the second panel of the Dial-Up Configuration Wizard.
Page 114
Connection Configuration Figure 14-1 Script Name Dialog Box Figure 14-2 New Script Name Dialog Box...
Connection Configuration Figure 14-3 RAS Script Dialog Box Table 14-1 RAS Script Dialog Box Function Description Script Name text box and Change The text box displays the name of the button currently selected script. You may change the selection by clicking on the Change button to open the Script Name dialog box.
Page 116
Connection Configuration Table 14-1 RAS Script Dialog Box, Continued Function Description New and Edit buttons New and Edit open the Edit Script Line dialog box (see Figure 14-4). Use this dialog box to create a new line in the script or edit an existing (selected) line.
RDP Connections Use the WTS Connection Wizard to configure an RDP connection. RDP connects to a server running Microsoft WTS (Windows Terminal Server). Using the WTS Connection Wizard When the New Connection dialog box is open (see “Creating New Connections”): 1.
Page 118
Connection Configuration Figure 15-1 WTS Connection Wizard 1 To use the first dialog box: 1. Enter a name for your dial-up connection in Name. 2. Enter the name or IP address of the server in Server. 3. Check the Low Speed Connection check box if appropriate. 4.
Page 119
Connection Configuration Figure 15-2 WTS Connection Wizard 2 To use the second dialog box: 1. Check the Automatic Logon check box if appropriate. 2. Enter a user name, password, and a domain to complete the information. 3. Click on Next.
Page 120
Connection Configuration Figure 15-3 WTS Connection Wizard 3 To use the third dialog box in the wizard: 1. Click on either the Desktop or Application File Name radio buttons. 2. If you clicked on Desktop, click on Next. 3. If you clicked on Application File Name: a.
Page 121
Connection Configuration Figure 15-4 WTS Connection Wizard 4 To use the fourth dialog box, click on Finish. The Connection Manager displays, listing your new RDP connection.
Terminal Emulation Connections Using the TE Client Connection Wizard When the New Connection dialog box is open (see “Creating New Connections”): 1. Use the drop-down scroll list to select Terminal Emulation. 2. Click on OK. Following are the three dialog boxes of this wizard. When you are finished configuring a connection, the new connection will be added to the Connection Name list in the Connection Manager.
Connection Configuration Figure 16-1 TE Client Connection Wizard - Connection Information To use the Connection Information dialog box: 1. Enter the connection name in Connection Name text box. 2. Select the emulation type in the Emulation scroll list. 3. Select the terminal type from the VT TerminalID scroll list. Table 16-1 describes the available functions in the VT TerminalID scroll list.
Page 124
Connection Configuration Table 16-1 Terminal Emulation and Terminal Type Terminal Emulation Terminal Type Select Emulation: Then select from VT TerminalID: VT52, VT100, VT400 7-Bit (default), or VT400 8-Bit vt100, vt101, vt102, vt125, vt220, vt240, vt320, vt340, vt420 (default), vt131, or vt132 Select Emulation: The function is deactivated.
Connection Configuration Table 16-1 Terminal Emulation and Terminal Type, Continued Terminal Emulation Terminal Type Select Emulation: Then select from HP Model: 2392A, 70092 (default), 2622A HP70092 International Settings Opens the International Settings dialog box (see Figure 16-2). The particular controls and selections that appear in this dialog box depends on the terminal emulation selected.
Connection Configuration Figure 16-3 TE Client Connection Wizard - Host Information To use the Host Information dialog box: 1. Click on TCP/IP, Modem, or Serial: 2. If you clicked on TCP/IP: a. Enter the host name or IP address in Host Name. b.
Connection Configuration c. Click on Next. The Automate Login Process dialog box displays. See Figure 16-4 and proceed with these instructions. 4. If you clicked on Serial: a. Make a selection from Connect To. b. Use the Configure command button if appropriate. (See “Using the Configuration of Serial Cable on Com1 (or Com2) Dialog Box”...
Connection Configuration c. Respond With - The scroll list receives input from the Insert command button and the Insert command button inserts an item from the scroll list. 2. Use the Add and Remove command buttons to add or remove lines from the Script scroll list.
Connection Configuration 2. Select a printer port from the Printer Port list: Parallel Cable on LPT1: (default) Serial Cable on COM1: Serial Cable on COM2: Selecting either of the serial printer ports enables the Configure command button, which opens the Configuration of COM1 (or COM2) dialog box. For details about the available selections in this dialog box see “Using the Configuration of Serial Cable on Com1 (or Com2) Dialog Box”...
Page 130
Connection Configuration Note After choosing Command Bar Items as an administrator, the terminal must be logged-in as a user to see the effect on the terminal session. Terminal security must be enabled. 2. Select the appropriate function from Action on Host Close. These functions are actions that will take place when the terminal emulation session is closed.
TCP/IP Telnet Configuration Note The information in this chapter applies to the terminal emulation connection only. Using the TCP/IP Telnet Configuration Dialog Box The Advanced command button on the TE Client Connection Wizard - Host Information dialog box invokes the TCP/IP Telnet Configuration dialog box. Figure 17-1 shows this dialog box.
Connection Configuration The following table discusses the functions of a Telnet connection. Table 17-1 TCP/IP Telnet Configuration Function Description Host Port Number Enter the Telnet host port number. The default is 23. Local Port Number Implemented to allow connection to Misys hosts. This allows the host to communicate back to the emulator on a different port than the emulator uses to talk to the host.
Page 133
Connection Configuration Table 17-1 TCP/IP Telnet Configuration, Continued Function Description The following image shows the TN3270 Options dialog box, displayed when the 3270 Options command button is pressed. Use this dialog box to set up 3270 options: 3270 LU Device Name - This group box is used to identify the LU (Logical Unit).
Page 134
Connection Configuration Table 17-1 TCP/IP Telnet Configuration, Continued Function Description • TN5250 Options The following dialog box shows the TN5250 Options dialog box, displayed when the 5250 Options command button is pressed. Use this dialog box to set up 5250 options. The options are: Device Name - Name of the device assigned to a Telnet session.
Connection Configuration Using the Modem Settings Dialog Box The Configure command button invokes the Modem Settings dialog box. Figure 17-2 shows this dialog box. Figure 17-2 Modem Settings DIalog Box The following table discusses the available modem settings. Table 17-2 Modem Settings Dialog Box Function Description Configuration Name...
Connection Configuration Using the Configuration of Serial Cable on Com1 (or Com2) Dialog Box This dialog box opens when the Configure command button is pressed for a serial connection type selection. Figure 17-3 shows this dialog box. Figure 17-3 Configuration of Serial Cable on Com1 (or Com2) Dialog Box...
Page 137
Connection Configuration The following table discusses this dialog box. Table 17-3 Configuration of Serial Cable on Com1 (or Com2) Dialog Box Function Description Configuration of a Use these functions to configure a serial cable: Serial Cable on • Baud Rate Com1 or Com2 •...
Internet Explorer Connections Note Internet Explorer requires that a minimum of 16 MB of flash memory and 32 MB of RAM is installed on the terminal. The installed memory is listed on the Terminal Properties window SysInfo and General tabs. When the New Connection dialog box is open (see “Creating New Connections”): 1.
Connection Configuration Figure 18-1 Internet Explorer Setup Dialog Box Note If the connection is to an NFuse server that provides ICA links within a Web page to allow ICA sessions to be launched from within a browser window, refer to “NFuse Server Configuration Requirements”...
Editing ICA Connections The Connection Manager lets you edit individual ICA connection parameters. It is done through the Edit Connection Details dialog box. The following figure shows this dialog box. Figure 19-1 Edit Connection Details Dialog Box...
Connection Configuration Using the Edit Connection Details Dialog Box The Edit Connection Properties dialog box consists of seven properties sheets. Use any or all of these properties sheets to edit connection parameters. To invoke the dialog box: 1. Click on the Configure tab in the Connection Manager dialog box. 2.
Page 142
Connection Configuration Table 19-1 Server Properties Sheet, Continued Function Description Delete Click on this command button to delete a server from the list: 1. Select a server from the list. 2. Click on the Delete command button. Move Up Click on this command button to move a server up the list: 1.
Connection Configuration Using the Application Properties Sheet The Application properties sheet is shown in Figure 19-2. Figure 19-2 Application Properties Sheet Invoke the properties sheet by clicking on the Application tab. Table 19-2 describes the functions of the properties sheet. Table 19-2 Application Properties Sheet Function Description...
Connection Configuration Using the Logon Properties Sheet The Logon properties sheet is shown in Figure 19-3. Figure 19-3 Logon Properties Sheet Invoke the properties sheet by clicking on the Logon tab. Table 19-3 describes the functions of the Logon properties sheet. Table 19-3 Logon Properties Sheet Function Description...
Connection Configuration Using the Window Properties Sheet The Window properties sheet is shown in the following figure. Figure 19-4 Window Properties Sheet...
Page 146
Connection Configuration Invoke the properties sheet by clicking on the Window tab. Table 19-4 describes the functions of the Window properties sheet. Table 19-4 Window Properties Sheet Function Description Window Colors Two or three radio buttons are displayed. If the terminal Color Palette (using the Display properties sheet in the Terminal Properties dialog box) is 256 colors, radio...
Connection Configuration Using the Options Properties Sheet The Options properties sheet is shown in Figure 19-5. Figure 19-5 Options Properties Sheet Invoke the properties sheet by clicking on the Options tab. Table 19-5 describes the functions of the Options properties sheet. Table 19-5 Options Properties Sheet Function Description...
Page 148
Connection Configuration Table 19-5 Options Properties Sheet, Continued Function Description SpeedScreen Drop-down list box. Select from: • Off (default) • • Auto SpeedScreen is a combination of technologies implemented in ICA that decreases bandwidth consumption and total packets transmitted, resulting in reduced latency and consistent performance regardless of the network connection.
Connection Configuration Using the Title Properties Sheet The Title properties sheet is shown in Figure 19-6. Figure 19-6 Title Properties Sheet This properties sheet contains only one function. Enter the title of your ICA connection in the text box on the sheet.
Connection Configuration Using the Firewall Settings Properties Sheet The Firewall Settings properties sheet is shown in Figure 19-7. Figure 19-7 Firewall Settings Properties Sheet Invoke this properties sheet by clicking on the Firewall Settings tab. Table 19-6 describes the functions of the properties sheet. Table 19-6 Firewall Settings Properties Sheet Function Description...
Page 151
Connection Configuration Table 19-6 Firewall Settings Properties Sheet, Continued Function Description Address of Proxy to Use Enter in this text box the IP address of the SOCKS proxy server. Activate this box by clicking on Connect Via SOCKS Proxy. By default this box is deactivated.
Editing RDP, Dial-Up, and Terminal Emulation Connections Dial-Up and Terminal Emulation Connections Edit dial-up and terminal emulation connections through the Connection Manager: 1. Click on the Configure tab. 2. Click to select a connection from the Connection Name list. 3. Click on the Edit command button. To edit a dial-up connection you invoke the Dial-Up Configuration Wizard.
Connection Configuration Figure 20-1 Edit Connection Dialog Box Using the Edit Connection Dialog Box The Edit Connection dialog box includes two properties sheets. Depending on your connections configuration, you use one of these properties sheets to edit connection parameters. To invoke the dialog box: 1.
Connection Configuration Using the Net Connections Properties Sheet The Net Connections properties sheet is displayed by default for the Edit Connection dialog box. Use this properties sheet to reconfigure the network portion of the connection. Table 20-1 describes the functions of the Net Connections properties sheet. Table 20-1 Net Connections Properties Sheet Function Description...
Connection Configuration Using the Application Properties Sheet Invoke the Application properties sheet by clicking on the Application tab in the Edit Connection dialog box. Use this properties sheet to reconfigure the applications-related portion of the connection. Figure 20-2 shows this sheet. Figure 20-2 Application Properties Sheet The following table describes the functions of the Application properties sheet.
Page 156
Connection Configuration Table 20-2 Application Properties Sheet Function Description Application to Run Select a connection from the Connection Name list in the Terminal Connection Manager. Use the following functions to specify an application to run when the connection is made. Desktop Click on this radio button to open the desktop when the connection is made.
External Devices Devices Properties Managing Network Adapters Add-On Aironet Wireless LAN Adapter Setup PC Card Adapters for Modems Touchscreens Date/Time Properties JETCET PRINT Local Printers PC Card Adapters for Token Ring Networks SNTP Client PC Card Adapters for Wireless Networks Volume Properties...
Devices Properties Figure 21-1 shows the Devices properties sheets for the SE models and LE models, respectively. To open the Devices properties sheet, 1. Press F2 to open the Terminal Properties dialog box. 2. Click on the Devices tab in the Terminal Properties dialog box. Devices Properties Sheet Table 21-1 describes the functions of this properties sheet.
External Devices Table 21-1 Devices Properties Sheet Function Description ISDN Settings Click on this command button to invoke the ISDN Settings dialog box. For more detailed information see “PC Card Adapters for Modems” in External Devices. By default this command button is activated. Add/Change Modem Click on this command button to invoke the Add or Change Modem dialog box.
Page 161
External Devices Table 21-1 Devices Properties Sheet, Continued Function Description RACORE-TR Click on this icon to invoke the RACORE - Token Ring Adapter Settings dialog box. For detailed information see “PC Card Adapters for Token Ring Networks” in External Devices. SNTP Client Click on this icon to invoke the SNTP Client dialog box.
Managing Network Adapters An adapter is a device that physically connects a terminal to a network. The Adapters Configuration dialog box gives you the ability to configure the adapters on a terminal. Figure 22-1 shows the dialog box. Figure 22-1 Adapters Configuration Dialog Box...
External Devices Using the Adapters Configuration Dialog Box To open this dialog box: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Devices tab. 3. Double click on the Adapters icon in the icon container on the Devices properties sheet.
External Devices IP Address Properties Sheet Use the IP Address properties sheet to enter the IP address of the terminal that is using the adapter. Figure 22-2 shows the IP Address properties sheet. Figure 22-2 IP Address Properties Sheet The following table discusses the functions of the IP Address Properties Sheet. Table 22-2 IP Address Properties Sheet Function Description...
External Devices Name Server Properties Sheet Use the Name Server properties sheet to enter the IP addresses of the DNS and WINS servers for the terminal using the adapter. Figure 22-3 shows the Name Server properties sheet. Figure 22-3 Name Servers Properties Sheet The following table discusses this properties sheet.
Add-On The Add-on dialog box contains two tab sections that let you remove firmware add-ons and to display information about available flash memory. To open this dialog box: 1. Press F2 to open the Terminal Properties dialog box. 2. Click on the Devices tab. 3.
External Devices Add-on Dialog Box System Tab Figure 23-2 shows the System tab section of the Add-on dialog box. It displays information about available flash memory and has no user controls. Figure 23-2 System Dialog Box...
Aironet Wireless LAN Adapter Setup The Aironet dialog box (Figure 24-1) allows you to configure the Aironet wireless LAN adapter solely by menu selections. To open this dialog box: 1. Press F2 to open the Terminal Properties dialog box. 2. Click on the Devices tab. 3.
External Devices Using the Aironet Dialog Box To configure the wireless LAN adapter, select a property from the Property list and select the desired value from the Value drop-down menu. Repeat the process for each listed property.
PC Card Adapters for Modems Your WBT supports PCMCIA adapted modems. This chapter discusses the setup for PCMCIA modems. Figure 25-1 shows the Add or Change Modem dialog box. Use this dialog box to set up a PCMCIA modem. To open the dialog box, click on the Add/Change Modem... command button on the Devices properties sheet.
Page 172
External Devices Table 25-1 Add or Change Modem Dialog Box Function Description Modem Name This field displays the brand name of the modem in your system. Init Commands Enter a modem initialization command string in this field. The default is ATE0V1&C1&D1<cr>. Flow Settings Use this group box to set the following flow settings: Flow Hardware...
External Devices ISDN Settings Use the ISDN Settings dialog box to set the terminal’s ISDN (Integrated Services Digital Network) settings. If you do not know this information, ask your system administrator. Figure 25-2 shows the dialog box. To invoke the dialog box, click on the ISDN Settings...
Page 174
External Devices Table 25-2 ISDN Settings Dialog Box Function Description Modem Name This field displays the brand name of the modem in your system. Primary ISDN Use this group box to configure the following ISDN Parameters parameters: Switch Type Use this drop-down scroll list to select the switch type. The default is North America.
Touchscreens Your WBT supports touchscreens. This chapter discusses the setup for the two touchscreens the terminal supports, ELO and MicroTouch. ELO Touchscreen Figure 26-1 shows the ELO Touchscreen dialog box. Use this dialog box to calibrate an ELO touchscreen. To open this dialog box: 1.
Page 176
External Devices Table 26-1 ELO Touchscreen Dialog Box Function Description Cable Connection Select from this scroll list the Com port to which the touchscreen is connected: • Disable • Serial Cable on COM1 • Serial Cable on COM2 The default for the list is Disable. Calibrate Click on this command button to calibrate the touchscreen.
External Devices MicroTouch Touchscreen Figure 26-2 shows the Microtouch Touchscreen Properties dialog box. Use this dialog box to set up a Microtouch touch screen. To invoke this dialog box: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Devices tab. 3.
External Devices Hardware Properties Sheet The Hardware properties sheet is displayed by default and is shown in Figure 26-2. The following table discusses the properties sheet. Table 26-2 Hardware Properties Sheet Function Description Information This group box displays information about the touchscreen that is connected to your terminal.
External Devices Cursor Properties Sheet The Cursor properties sheet is shown in Figure 26-3. Figure 26-3 Cursor Properties Sheet Table 26-3 discusses the Cursor properties sheet. Table 26-3 Cursor Properties Sheet Function Description Cursor Offset Use this properties sheet to set the distance between your finger and the cursor.
Page 180
External Devices Table 26-3 Cursor Properties Sheet, Continued Function Description Click on this command button to invoke a dialog box that will allow you to set distances: Follow the instructions on the dialog box. Stabilize Cursor This command button is always deactivated.
External Devices Touch Settings Properties Sheet Figure 26-4 shows the Touch Settings properties sheet. Figure 26-4 Touch Settings Properties Sheet The following table discusses this properties sheet. Table 26-4 Touch Settings Properties Sheet Function Description Touch Mode Use this group box to configure a touch mode.
External Devices Calibrate Properties Sheet The Calibrate properties sheet is shown in Figure 26-5. Figure 26-5 Calibrate Properties Sheet The Calibrate properties sheet has one command button. Click on the Calibrate command button to begin the calibration process. A white screen with a single cross-hair in the lower left-hand corner displays: 1.
Date/Time Properties The Date/Time Properties dialog box (Figure 27-1) allows you to set the date and time on the terminal. To open this dialog box: 1. Press F2 to open the Terminal Properties dialog box. 2. Click on the Devices tab. 3.
Page 184
External Devices Note If a time server is available (See SNTP Client chapter), the terminal time will automatically synchronize to the time provided by the server. Otherwise, the time must be set manually. To manually set the time, enter a time slightly ahead of the actual time in Current Time text box, and then just as the actual time reaches the set time, click on the Apply button.
JETCET PRINT JETCET PRINT Professional is a utility that supports local printing from your Windows CE-based terminal. JETCET only supports IE 4.0. ICA, RDP, or terminal emulations do not use the JETCET printer driver. The JETCET PRINT Professional dialog box (Figure 28-1) allows you to select printing properties.
Displays a list of manufacturers of the currently selected default printer. Available printers are: • Cannon BJC • Citizen • Epson Compatible • HP PCL3 Compatible (default) • PocketJet • PocketJetII • PostScript Note These are the only supported printers.
External Devices Table 28-1 JETCET PRINT Professional Dialog Box Settings, Continued Function Description Display this Dialog While Printing Check if you want this dialog box to check box automatically open when printing. Properties... command button Opens the Printer Properties dialog box.
Local Printers The terminal supports both Line Printer Daemon (LPD) printing and printing from applications. LPD Printing This paragraph discusses the configuration of local printing using the LPD Config dialog box. Note LPD can only be used with the parallel port of a terminal.
External Devices Using the LPD Config Dialog Box To invoke this dialog box: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Devices tab. 3. Click on the LPD icon in the icon container. Table 29-1 discusses the dialog box. Table 29-1 LPD Config Dialog Box Function Description...
External Devices Table 29-2 discusses the properties sheet. Table 29-2 Printers Properties Sheet Function Description List box Contains a listing of printers associated with each available port (Com1, Com2, LPT1). Lists the name, type, and whether it is the default printer.
External Devices Using the Printer Properties Dialog Box Figure 29-3 shows the Printer Properties dialog box. Figure 29-3 Printer Properties Dialog Box Use the Manufacturers and Printers list boxes to select a printer. The Printer Name text box will initially contain the manufacturer’s name for the printer. Overtype this with the name by which you will refer to this printer.
PC Card Adapters for Token Ring Networks Note This chapter applies only to the Model T1010 terminal. Your WBT supports PCMCIA RACORE token ring adapter cards. This chapter discusses the setup for RACORE token ring card. Figure 30-1 shows the RACORE Token Ring Adapter Settings dialog box.
External Devices Figure 30-1 RACORE - Token Ring Adapter Settings Dialog Box Table 30-1 discusses the dialog box. Table 30-1 RACORE - Token Ring Adapter Settings Function Description User Defined MAC Address Use this text field to enter the MAC address of the token ring PC card.
SNTP Client Your terminal is capable of synchronizing its clock to time provided by an SNTP (Simple Network Time Protocol) server. Figure 31-1 shows the SNTP Client dialog box. Use this dialog box to select the SNTP server and to synchronize the terminal time.
Page 198
External Devices Table 31-1 discusses the dialog box. Table 31-1 SNTP Client Settings Function Description SNTP Server drop-down list box Permits selection of an SNTP server from a list built using the Add, Edit, and Remove command buttons. Add, Edit, and Remove command Add and Edit open the Edit SNTP buttons Server dialog box, from which you...
PC Card Adapters for Wireless Networks Your WBT supports PCMCIA adapters for WaveLAN wireless networks. This chapter discusses the setup for these adapters. Figure 32-1 shows the WaveLAN/ IEEE Settings dialog box. Using the WaveLAN/IEEE Settings Dialog Box To invoke this dialog box: 1.
Page 200
External Devices Figure 32-1 WaveLAN/IEEE Settings Dialog Box The following table discusses the properties sheet. Table 32-1 Basic Properties Sheet Function Description WaveLAN Network Name Enter in this field the name of the LAN network that you want to connect to. This field must match the name of the current wireless network infrastructure.
External Devices Advanced Properties The Advanced properties sheet is shown in Figure 32-2. Note Advanced properties normally should not need to be changed. The default values should be sufficient for normal network use. Figure 32-2 Advanced Properties Sheet The following table discusses this properties sheet. Table 32-2 Advanced Properties Sheet Function Description...
Page 202
External Devices Table 32-2 Advanced Properties Sheet, Continued Function Description AP Density Select in this scroll box an AP density (access point density) value. This parameter controls the roaming sensitivity of the terminal. The values are: • Low Density • Medium Density •...
External Devices Power Management Figure 32-3 shows the Power Management properties sheet. Figure 32-3 Power Management Properties Sheet Table 32-3 discusses the properties sheet. Table 32-3 Power Management Properties Sheet Function Description Card Power Management Click to check this box to enable power management.
External Devices Encryption Figure 32-4 shows the Encryption properties sheet. Figure 32-4 Encryption Properties Sheet Table 32-4 discusses the properties sheet. Table 32-4 Encryption Properties Sheet Function Description Enable Encryption check box Check this box to enable encryption. Encryption Key text boxes Store encryption keys that you may use.
Volume Properties Your WBT supports audio for the ICA client. This chapter discusses the audio controls (see below). Note This volume control will function only before Windows Media Player is launched. Figure 33-1 Volume Properties Dialog Box...
External Devices Using the Volume Properties Dialog Box To invoke this dialog box: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Devices tab. 3. Click on the Volume icon in the icon container. Table 33-1 lists the controls in the dialog box. Table 33-1 Volume Properties Dialog Box Function Description...
Cable Firmware Upgrades The following section describes the cable method of firmware download. The cable method for all terminals is parallel download, using a Laplink cable and the MS-DOS xfer.exe program. Caution Do not power the terminal off during the upgrade. Note 1.
Firmware Upgrades Setup The following equipment may be needed: • IBM-compatible PC with a CD-ROM drive and a parallel port. • Terminal firmware upgrade diskette or CD, or downloaded firmware binary • LapLink or equivalent parallel port communications cable (used only if parallel port is used for downloading).
Firmware Upgrades Manual Download Use the following instructions to perform a manual download. 1. Type xfer <filename.ext> at the DOS prompt 2. Press Enter, and the Download Utility dialog box appears. See the following figure. Figure 34-1 Download Utility Dialog Box 3.
Firmware Upgrades The following figure shows the connections for the parallel download cable. Figure 34-2 Parallel Download Cable Connectors Not Used Not Used Not Used Terminal Download Parallel Device Port DB-25M Not Used Not Used Not Used Not Used...
FTP Pull Firmware Upgrades Use the Upgrade properties sheet to: 1. Set up a terminal for communication with an FTP server. 2. Perform FTP pull upgrades. See Figure 35-1. Using the Upgrade Properties Sheet To invoke this properties sheet: 1. Press the F2 key. 2.
Page 214
Firmware Upgrades Figure 35-1 Upgrade Properties Sheet The following table describes the functions found on this properties sheet.
Page 215
Firmware Upgrades Table 35-1 Upgrade Properties Sheet Function Description Local Firmware Use this group box to upgrade your terminal's firmware Upgrade using an FTP server. The functions are: Use FTP Information from DHCP Server Select this function if you want to get the FTP server and directory information from a DHCP server.
Firmware Upgrades Table 35-1 Upgrade Properties Sheet, Continued Function Description Save Password Check this box to save the entered password in the registry. Upgrade Click on this command button to initiate the upgrade procedure. By default the button is disabled an FTP server selection is made in the Local Firmware Upgrade area of the dialog box.
Page 217
Firmware Upgrades A series of dialog boxes displays during the upgrade. Figure 35-2 Firmware Upgrade Dialog Box 1 This is the first dialog box that displays. Read for information and click on Start to upgrade, or Cancel to quit the process. Note If you are downloading the same version of firmware that is already on the terminal, a dialog box displays...
Page 218
Firmware Upgrades Click on Start to begin the download. The process is: • The image gets read. • The flash gets erased. • The image gets written to the flash. When the upgrade is complete, the terminal will reboot to the Connection Manager.
SNMP Firmware Upgrades Using the SNMP Network Administration Dialog Box The SNMP Network Administration dialog box contains the functions that you can use to administer to the terminals on your SNMP network. See Figure 36-1. To invoke this dialog box: 1.
Page 220
Firmware Upgrades Figure 36-1 SNMP Network Administration Dialog Box The following table discusses the functions of this dialog box.
Page 221
Firmware Upgrades Table 36-1 SNMP Network Administration Dialog Box Function Description SNMP Use this group box to set up SNMP communication Communication using the following functions: Enable Authenticating Failure Trap Check this box to enable the authenticating failure trap. Community Use this group box to configure the network management of a community.
Firmware Upgrades Table 36-1 SNMP Network Administration Dialog Box, Continued Function Description Terminal Information Use this group box to list information about terminals. Description Use this group box to describe a terminal. (Optional) Location Type the location of the terminal in this field. Contact Type the name of the administrator of the subject terminal in this field.
Page 223
Firmware Upgrades 3. Using the SNMP/Network Administrator dialog box, verify that the community and set community names for the terminal match the community and set community names in the SNMP manager. Note You can set the Set Community name for a terminal if you have DHCP enabled by setting DHCP Option 164 to the set community name your SNMP manager uses.
DHCP Firmware Upgrades Using the Change DHCP Option IDs Dialog Box Use the Change DHCP Option IDs dialog box to set up DHCP option IDs for terminal administration and upgrade. See Figure 37-1 for a view of this dialog box. Your terminal uses DHCP and the information on the Change DHCP Option IDs dialog box to: •...
Page 225
Firmware Upgrades Figure 37-1 Change DHCP Option IDs Dialog Box Note Option 158 is not supported yet. It is reserved for future use. The following table describes the functions of this dialog box.
Page 226
Firmware Upgrades Table 37-1 Change DHCP Option IDs Dialog Box Function Description Common Option IDs Group box used to assign DHCP option IDs to common DHCP variables. The number in each field is the DHCP option ID. The following field titles are the DHCP variables: •...
Firmware Upgrades The Upgrade Process 1. Press the F2 key for the Terminal Properties dialog box. 2. Click on the Network tab. 3. Click on the Obtain an IP Address From DHCP Server radio button, if the function is not enabled. 4.
Firmware Upgrades Manual DHCP Firmware Upgrades 1. Follow instruction 1 through 3 and 5 through 8 in “Automatic Firmware Upgrades.” 2. Click on the Upgrade... command button on the Upgrade properties sheet. This will initiate the firmware upgrade. Once the upgrade is complete, the terminal will reboot to the Setup Wizard.
Security Properties Use the Security properties sheet to access security functions and global terminal functions. You can also use this sheet to set up terminal accounts. Figure 38-1 shows the Security properties sheet. Using the Security Properties Sheet To invoke the Security properties sheet: 1.
Page 231
Client Security Figure 38-1 Security Properties Sheet The following table describes the functions of this properties sheet.
Page 232
Client Security Table 38-1 Security Properties Sheet Function Description Security Enable This group is used to enable terminal security and restrict access connection configurations. It contains the following functions: Security Enable Click to enable terminal security and deactivate the Hide Configure Tab function. It forces a user to log in if autologin is not enabled.
Page 233
Client Security Table 38-1 Security Properties Sheet, Continued Function Description Verbose When selected, a Failover Log Window is displayed reporting details about the connection process. AutoLogin Enable This group is used to configure automatic login parameters. See “Autologin and Autoconnect” for more information about autologin.
Client Security Table 38-1 Security Properties Sheet, Continued Function Description Auto Fail Recovery Select the check box to enable the function. Auto Fail Recovery is a function that checks the validity of a disconnect, and closes down a connection if the disconnect is valid.
Terminal Accounts A terminal account is a group of connection and configuration parameters organized into an account and assigned to a terminal user. Terminal accounts can include specific connections, privileges, password protection, Autologin and/or Autostart and Single Button Connect functions. The three types of accounts are: •...
Client Security User Accounts With a User account, you will not be able to configure the connection for the account unless enabled by the administrator. You will be able to access the password function to change your password (if this privilege is granted). You can also access the following Terminal Properties sheets: •...
Page 237
Client Security For more information about terminal accounts, see: • “Security Properties” • “Creating Terminal Accounts” • “Modifying and Deleting Terminal Accounts”...
Creating Terminal Accounts The Add User Account dialog box is used to create terminal accounts. The following figure shows this dialog box. Using the Add User Account Dialog Box Use the Add User Account dialog box to set up the parameters for new terminal accounts.
Page 239
Client Security Figure 40-1 Add User Account Dialog Box The following table describes the functions of the Add User Account dialog box.
Page 240
Client Security Table 40-1 Add User Account Dialog Box Function Description Enable Password Change Group box used to set up password functions. Note The fields of this group box are limited to 20 characters or less. Enable Password Change Click to enable. Enabling the function will allow the user to change a password.
Page 241
Client Security Table 40-1 Add User Account Dialog Box, Continued Function Description Unassign Use this button to remove a connection from Connection Name. You must first select the connection you want to remove. Up and Down Select a connection and click on the Up or Down command button to move it up or down one place in the Connection Name list.
Page 242
Client Security Table 40-1 Add User Account Dialog Box, Continued Function Description User Click this radio button to assign the privilege of user to an account. If User is enabled, Enable Password Change is activated. Administrators can give users the ability to change their password.
Modifying and Deleting Terminal Accounts The Modify User Account dialog box is used to modify and delete terminal accounts. The Delete command button, discussed later in Deleting Terminal Accounts, is used to delete terminal accounts. Figure 41-1 shows the Modify User Account dialog box.
Page 244
Client Security Figure 41-1 Modify User Account Dialog Box The following table describes the functions of the Modify User Account dialog box.
Page 245
Client Security Table 41-1 Modify User Account Dialog Box Function Description Enable Password Group box used to set up password functions. Change Note The fields of this group box are limited to 20 characters or less. Enable Password Change Click to enable. Enabling the function will allow the user to change the account’s password.
Page 246
Client Security Table 41-1 Modify User Account Dialog Box, Continued Function Description Assign Click on this command button to copy a connection from Available Connections to Connection Name. You must first select to highlight the connection you want to copy. Unassign Use this button to delete a connection from Connection Name.
Page 247
Client Security Table 41-1 Modify User Account Dialog Box, Continued Function Description Note Connection Name, Type and AutoStart comprise a list box. When the Modify User dialog box displays, what appears in this list box is the connection type in the last account that you created.
Client Security Deleting Terminal Accounts Terminal accounts can be deleted from the User Accounts list on the Security properties sheet. To delete an account: Caution You can not recover a deleted account. 1. Click on the account that you want to delete in the User Accounts list. 2.
Terminal Login Terminal login is used as a terminal security measure. Only users with the correct User Name and Password will be able to log into the terminal. Figure 42-1 shows the Terminal Login dialog box. Figure 42-1 Terminal Login Dialog Box Logging Into the Terminal To use the login feature: 1.
Client Security 1. Type in the correct User Name and Password. 2. Click on OK to log into the terminal again. Autologin and Autoconnect Autologin The autologin feature is an automatic login function that does not use a dialog box as a prompt to log you into your terminal again.
Client Security 1. Enable security. 2. Select the account you want Autostart added to and click on the Modify User... command button. 3. Use the Modify User dialog box to add Autostart. 4. Restart or log off of your terminal. The Terminal Login dialog box displays.
Client Security Figure 42-3 Single Button Connect Dialog Box To enable this function: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Security tab to invoke the Security properties sheet. 3. Highlight the user’s name in User Accounts. 4.
Failover Failover is a connection feature that is enabled using the Security properties sheet. It forces the terminal to “ping” the intended device before making a connection to it. The function operates when FailOver Enable is enabled on the Security properties sheet. Failover is global and wholly automatic to the terminal. It will work regardless of what connection you are trying to make, or what type of account under which you are logged in.
Client Security If failover pings all the connections in the list and a connection is not made, the function stops. The following error message displays. Figure 43-1 Failover Message Box Once failover is finished, the Failover Log Window dialog box displays. Figure 43-2 shows this dialog box.
Page 255
Getting Help Windows-based Terminal Specifications How to... Terminal Port Pin Assignments Terminal Connector Pin Assignments Null Modem Cable Pin Assignments Modem AT Commands...
Windows-based Terminal Specifications Specifications for the Windows-based terminals covered in this manual are listed in the following tables: • Model T1000, Table 44-1 • Model T1010, Table 44-2...
Getting Help Table 44-1 Winterm Model T1000 Terminal Specifications Description Specification Terminal Type Modular Windows-based terminal • Integrated Microsoft RDP and Citrix ICA 3 protocols and terminal personalities (standard) Display Support • VESA monitor support, with DDC for automatic setting of resolution and refresh rate •...
Page 258
Getting Help Table 44-1 Winterm Model T1000 Terminal Specifications, Continued Description Specification Networking • TCP/IP with DNS and DHCP • 10/100BaseT Fast Ethernet, twisted pair (RJ-45) • Point-to-Point Protocol (PPP) • Multiple master browser support on ICA • Supports Citrix load balancing on ICA •...
Page 259
Getting Help Table 44-1 Winterm Model T1000 Terminal Specifications, Continued Description Specification Setup and Configuration User Interface • Local boot • Start-up wizard for simple set-up • See Table 3-1 for keyboard languages supported Configuration • Configurable automatic login • Individual user account customization (scripting) Physical Characteristics...
Page 260
Getting Help Table 44-1 Winterm Model T1000 Terminal Specifications, Continued Description Specification Regulatory Compliance Ergonomics • German ZH1/618 • EN29241-3 approved • EPA Energy Star Safety • UL 1950, CSA 950 • TÜV-GS (EN60 950) approved RF Interference • FCC Class B •...
Page 261
Getting Help Table 44-2 Winterm Model T1010 Terminal Specifications Description Specification Terminal Type Modular Windows-based Terminal • Integrated Microsoft RDP and Citrix ICA 3 protocols and terminal personalities (standard) Display Support • VESA monitor support, with DDC for automatic setting of resolution and refresh rate •...
Page 262
Getting Help Table 44-2 Winterm Model T1010 Terminal Specifications, Continued Description Specification Communications • Two serial ports: 16C550 UART (fifo) compatible, up to 115.2 kBaud • One parallel port: bi-directional Centronics-compatible, DB-25 • PCMCIA type II slot • One USB port •...
Getting Help Table 44-2 Winterm Model T1010 Terminal Specifications, Continued Description Specification Environment Temperature Range • Powered on: 32° to 104°F (0° to 40°C) • Powered off: –14° to 140°F (–10° to 60°C) • Convection cooling, fanless design Humidity • 20 to 80% noncondensing Operating Altitude Range •...
How to... Turn off Autologin: 1. Press F2 on your keyboard to invoke the Terminal Properties dialog box. 2. Click on the Security tab in the Terminal Properties dialog box. 3. Click (to uncheck) the AutoLogin Enable check box. 4. Click on the OK command button on the Security properties sheet to return to Connection Manager.
Getting Help 4. Use the Button Configuration radio buttons to select either Right-handed (default) or Left-handed. 5. Use the sliders in the Pointer Acceleration and Pointer Speed boxes to adjust your mouse speed. 6. Click on the OK command button on the Mouse Properties dialog box and click on Close on the Terminal Properties dialog box to return to Connection Manager.
Page 266
Getting Help Switch between multiple sessions: • Press Ctrl+Alt+ to proceed to the previous session. • Press Ctrl+Alt+ to proceed to the next session. Reset your terminal: 1. Press F2 on your keyboard to invoke the Terminal Properties dialog box. 2.
Page 267
Getting Help Configure a local printer: If you are using the Winframe 1.7/ICA platform: 1. Log in to your WinFrame server. 2. Click on Print Manager in Program Manager. 3. Click on Connect to Printer on the Printer menu. 4. Click on Client Network, then Client on the Shared Printer menu. 5.
Page 268
Getting Help 2. If it is a MetaFrame server: a. Click on Start, then Programs. b. Click on MetaFrame, then Tools. c. Click on ICA Client Printer Configuration. 3. If it is a WinFrame server: a. Click on ICA Client Printer Configuration in the Administrative Tools program group in the Program Manager.
Terminal Port Pin Assignments The following two figures show the pin assignments for the serial and parallel ports. These ports are located on the back panel of your terminal. See Terminal Installation for information about terminal back panels. Figure 46-1 Serial Port Signal Name Carrier Detect (DCD) Receive Data (RX)
Page 270
Getting Help Figure 46-2 Parallel Port (EPP/SPP) Signal Name - Strobe + Data Bits 0 + Data Bits 1 + Data Bits 2 + Data Bits 3 + Data Bits 4 + Data Bits 5 Parallel + Data Bits 6 Parallel Device Port...
Terminal Connector Pin Assignments The following figure shows the pin assignments for the 10Base-T and 100Base-T connector. This connector is located on the back panel of your terminal. See “Terminal Features” for information about the back panel. Note It is recommended that you use Category 5 twisted-pair cable to connect your terminal to a hub.
Getting Help The following figure lists the connector pin assignments for the terminal’s VGA connector. This connector is located on the back panel of your terminal. See “Terminal Features” for information about the back panel. Figure 47-2 VGA Connector Signal Name Red Video Green Video Blue Video...
Modem AT Commands The tables of this section list typical modem AT command sets. Table 49-1 AT Commands with No Lead-in Character Command Description B, B0 ITU-T (CCITT) V.22 mode when at 1200 bps; V.21 at 300 bps Enable character echo to terminal in command mode H, H0 Go on-hook (hang up) Connection speed set to highest possible DCE rate,...
Page 275
Getting Help Table 49-2 AT Commands Beginning with “&” Command Description &B1 Disable port rate adjust &C1 Carrier detect follows data carrier &D2 Hang up and go to command mode during On-to-Off DTR transition &F, &F0 Recall factory settings as active configuration &M0 Asynchronous mode &N, &N0...
Page 276
Getting Help Table 49-3 AT Commands Beginning with “\”, Continued Command Description Bidirectional hardware flow control Display current Configuration, Long Version \V, \V0 Disable /REL connect codes \X, \X0 XON/XOFF pass-through disabled Table 49-4 AT Commands Beginning with “%” Command Description Data compression requested (V.42bis in LAPM, MNP5 in MNP)
Page 277
SNMP Remote Configuration Chart The following chart is provided to help network administrators make remote configuration changes to WBTs in a managed network. These changes are made by physically writing to the managed devices using the logical objects listed in the MIB as reference.
Page 278
Appendix A For the Logical Object... You Can Write... To Modify... wbt3I/ODevice Group wbt3kbLanguage Any of the following The Locale scroll list on numbers: the Input properties sheet 0 = English-US 1 = English-UK 2 = French 3 = German 4 = Spanish 5 = Italian 6 = Swedish...
Page 279
Appendix A For the Logical Object... You Can Write... To Modify... wbt3Display Group wbt3EnergySaver Any following number: The Screen Saver and Turn Off Monitor radio 0 = none buttons on the Display 1 = use a screen saver properties sheet 2 = use monitor off wbt3ScreenTimeOut Any integer from 1 to...
Appendix A For the Logical Object... You Can Write... To Modify... wbt3DispUseDDC Any following number: The Desktop Area and Refresh Frequency scroll 0 = do not use DDC list on the Display 1 = use DDC properties sheet wbt3DHCPoptionIDs Group RemoteServer Any integer that The Remote Server field...
Page 281
Appendix A For the Logical Object... You Can Write... To Modify... FTPFileServer An integer that The File Server field in corresponds to a DHCP the Change DHCP option to change the Option ID’s dialog box default Option 161 to another option FTPRootPath An integer that The File Root Path field in...
Page 282
Appendix A For the Logical Object... You Can Write... To Modify... VirtualPortServer An integer that The Server field in the corresponds to a DHCP Change DHCP Option option to change the ID’s dialog box default Option 168 to another option wbt3CustomFields Group wbt3CustomField1 Any alphanumeric...
Page 283
Appendix A For the Logical Object... You Can Write... To Modify... wbt3SubmitLoadJob Any following integer: This object does not correspond to any fields in 0 = job not ready the UI 1 = job ready wbt3UpDnLoadIndex Any integer from This object does not 0..UpDnLoadNum correspond to any fields in the UI...
Page 284
Appendix A For the Logical Object... You Can Write... To Modify... wbt3Action Group wbt3RebootRequest Any following integer: This object does not correspond to any fields in 0 = do not reboot the UI 1 = reboot wbt3ResetToFactoryDefault Any following integer: The Reset the Terminal to Factory Default 0 = not checked...
Page 285
Appendix A For the Logical Object... You Can Write... To Modify... wbt3HideConfigTab Any following integer: The Hide Configure Tab check box on the Security 0 = unchecked properties sheet 1 = checked wbt3FailOverEnable An integer, select: The Failover Enable check box on the Security 0 = unchecked properties sheet 1 = checked...
Page 286
Appendix A For the Logical Object... You Can Write... To Modify... wbt3TrapServers Group wbt3TrapServer1 Any alphanumeric The Server 1 text box in character to a text string the SNMP Network using a maximum of 60 Administration dialog characters wbt3TrapServer2 Any alphanumeric The Server 2 text box in character to a text string the SNMP Network...
Page 287
Appendix A For the Logical Object... You Can Write... To Modify... wbt3dnsEnable Any following integer: The Enable DNS check box in the Advanced 0 = unchecked Network Settings dialog 1 = checked wbt3defaultDomain Any alphanumeric The Default Domain text character to a text string box in the Advanced using a maximum of 255 Network Settings dialog...
Page 288
Appendix A For the Logical Object... You Can Write... To Modify... wbt3Apps Group wbt3RDPencryption Any following integer: The RDP Encryption Enable check box on the 0 = checked Apps properties sheet 1 = unchecked wbt3VirtualPortServerIPaddress Any alphanumeric The Virtual Port Server character to a text string text box on the Apps using a maximum of 255...
Page 289
Appendix A For the Logical Object... You Can Write... To Modify... ICAtoggleTitleBar Any following integer: The Toggle Title Bar scroll list on the Hotkeys 0 = ctrl properties sheet 1 = shift ICAtoggleTitleBar2 Any integer from 0..9 The number scroll list to the right of the Toggle Title Bar scroll list on the Hotkeys properties sheet...
Page 290
Appendix A For the Logical Object... You Can Write... To Modify... ICAaltTab2 Any integer from 0..9 The number scroll list to the right of the ALT-TAB scroll list on the Hotkeys properties sheet ICAaltBackTab Any following integer: The ALT-BACKTAB scroll list on the Hotkeys 0 = ctrl properties sheet...
Page 291
Appendix A For the Logical Object... You Can Write... To Modify... wbt3RDPConnections Group wbt3RDPConnServer Any alphanumeric The Server text box in the character to a text string WTS Connection Wizard using a maximum of 32 (number 1) characters wbt3RDPConnLowSpeed Any following integer: The Low Speed Connection check box in 0 = not checked...
Page 292
Appendix A For the Logical Object... You Can Write... To Modify... wbt3ICAConnCommType The integer 0 = ctrl The Network Connection/Dial-In Connection radio buttons in the Specify Connection Type dialog wbt3ICAConnServer Any alphanumeric The Citrix Server/ character to a text string Published Application text box in the Select a Citrix Server or...
Page 293
Appendix A For the Logical Object... You Can Write... To Modify... wbt3ICAConnSoundQuality Any following integer: The Sound Quality scroll list in the Compression, 0 = (none) Cache, Encryption and 1 = low quality Sound dialog box 2 = medium quality 3 = high quality wbt3TermConnCommType The integer 0 = network...
Page 294
Appendix A For the Logical Object... You Can Write... To Modify... wbt3TermConnVTEmuModel 0 = VT100 The VT Terminal ID scroll 1 = VT101 list in the TE Client 2 = VT102 Connection Wizard - 3 = VT125 Connection Information 4 = VT220 dialog box 5 = VT240 6 = VT320...
Page 295
Appendix A For the Logical Object... You Can Write... To Modify... wbt3TermConnTelnetName Any alphanumeric The Connection Name character to a text string text box in the Connection Information dialog box wbt3TermConnPrinterPort The integer 0 = LPT1 The Printer Port scroll list in the TE Client Connection Wizard - Printer Port Settings...
Appendix A For the Logical Object... You Can Write... To Modify... wbt3password Any alphanumeric The Password text box in character to a text string the Add User Account and Modify User Account dialog boxes wbt3privilege Any following integer: The Administrator/User/ Guest radio buttons in the 0 = admin Add User Account and...
Page 297
Appendix A For the Logical Object... You Can Write... To Modify... wbt3Connection6 Any alphanumeric The sixth connection listed character to a text string in the Connection Name using a maximum of 20 list in the Add User characters Account and Modify User Account dialog boxes wbt3Connection7...
Page 298
Appendix A For the Logical Object... You Can Write... To Modify... wbt3AutoStart5 Any following integer: The fifth entry listed in the AutoStart list in the Add 0 = not checked User Account and 1 = checked Modify User Account dialog boxes wbt3AutoStart6 Any following integer: The sixth entry listed in the...
NFuse Server Configuration Requirements Introduction Firmware version 3.5 introduces two new methods for accessing ICA published applications: • Program neighborhood light (PNLite) (see “ICA Client Settings”) • Browser based access, in which an NFuse server provides ICA links within a Web page to allow ICA sessions to be launched from within a browser window (see “Internet Explorer Connections”).
Page 300
Appendix A 1. The Citrix wizard will generate a page named default.htm that will cause a failure in the version of Internet Explorer included with Winterm software version 3.5. The generated page attempts to display a pop-up browser window. The Internet Explorer version on the terminal does not support this capability and the browser simply displays a blank page with a small red X in the upper left corner.
Glossary Glossary The following glossary is a list of commonly used terms in this guide. Term Definition 10Base-T One of several adaptations of the Ethernet (IEEE 802.3) standard for Local Area Networks (LANs). The 10Base-T standard (also called Twisted Pair Ethernet) uses a twisted-pair cable with a maximum length of 100 meters.
Page 302
Glossary DHCP The Dynamic Host Configuration Protocol (DHCP) provides configuration parameters to Internet hosts. DHCP consists of two components: a protocol for delivering host-specific configuration parameters from a DHCP server to a host and a mechanism for allocation of network addresses to hosts. DHCP is built on a client-server model, where designated DHCP hosts allocate network addresses and deliver configuration parameters to dynamically configured hosts.
Page 303
Glossary Flow control The procedure for regulating the flow of data between two devices, flow control prevents the loss of data when one device’s receiving buffer has reached its capacity. File Transfer Protocol. FTP is a program for transferring files in TCP/IP environments such as the intranet in which a user, acting as a client, downloads files from a remote server.
Page 304
Glossary IP address Internet Protocol Address. The 32-bit, 4-byte address assigned to machines with TCP/IP. Every machine that is on the Internet has a unique IP address. This facilitates interconnectivity among a variety of independent host systems. An IP address is usually represented in dotted decimal notation (called a dotted quad) consisting of 4 parts separated by dots, e.g.: 165.113.245.2...
Page 305
Glossary Modem (Mo)dulator/(dem)odulator. Data communication equipment (DCE) devices that provide connections for computers into the public switched telephone network (PSTN). They convert (modulate) the digital signals of computers into analog signals that can be transmitted over telephone lines. A modem at the other end of the link then demodulates the signals back to digital bits.
Page 306
Glossary PCMCIA Personal Computer Miniature Connector Interface Adapter. Hardware and software standards for credit-card-sized integrated circuit cards. Ping Packet InterNet Groper. A protocol used in the Transmission Control Protocol (TCP) environment to test whether a node or remote device is communicating on a local area network (LAN) or wide area network (WAN).
Page 307
Glossary RS-232 cable A cable for serial interfaces between the terminal and communications devices, such as a modem. The cable connects to the 9-pin serial port at the back of the terminal. Maximum cable length is 50 feet; maximum signaling rate is 20 Kbits/sec.
Page 308
Glossary TCP/IP Transmission Control Protocol/Internet Protocol. A standard set of protocols that govern the basic workings of the Internet. It was developed by DARPA and implemented in 1982. TCP/IP encompasses both network layer and transport layer protocols (in the OSI model). While TCP and IP specify two protocols at specific protocol layers, TCP/IP is often used to refer to the entire DOD protocol suite based upon these, including Telnet, FTP, UDP and RDP.
Page 309
Glossary Universal Serial Bus. An external peripheral interface standard for communication between computer and external peripherals over an inexpensive cable using biserial transmission. USB works at 12 Mbps with specific consideration for low-cost peripherals. USB cables can be up to 5 meters long. Virtual Port Incoming Telnet and rlogin connections are not associated with a physical port.
Page 310
Index 315 Index SNMP Network Administration 213 Startup (connection) 69 TCP/IP Settings 93 Upgrade 210, 223 X xxvii Connection protocols Numerics Citrix ICA Client 68 10Base-T 305 Dial-Up Client 68 Internet Explorer 68 Microsoft Remote Desktop Client 68 Terminal Emulation 68 Add-on 155 Control keys Aironet 159...
Page 311
Index 316 Global ICA Settings 55 Microsoft Remote Desktop Client 101 Host Information 111 Terminal Emulation 107 ISDN Settings 163 Functions Microtouch Touchscreen Properties 167 16 Megabits/Second 188 Modify User Account 243 4 Megabits/Second 188 New Connection 67, 71, 81, 101, 107, Accept Any Authentication Including Clear Text 95 Optional Information 19...
Page 312
Index 317 Connection Name and Type 230 Make the Selected Connection Your Connection Preferences 91 Default Connection 70 Connection Speed 141 Manual Dial 91 Controller Type 168 Modem Name 162, 164 Cursor Offset 169 Multilink PPP 164 Custom 216 Multiple Connect 229 Date/Time 149 Network Connection 71 Default Gateway 153...
Page 313
Index 318 SNMP Update Enable 53 SNTP Client 150 Headphone jack SOCKS 62 3360SE 5, 11 Specify an IP Address 45, 153 How to Stabilize Cursor 170 Adjust your mouse 265 Startup Options 69 Check your terminal’s revision of Status 168 software 265 Status Dialog 56 Configure a local printer 268...
Page 314
Index 319 Server Location 59 SysInfo 39 Parallel port Touch Settings 171 3360SE 5, 11 Upgrade 39, 207, 210 Params.ini 217 Web 39 Pin assignments 10Base-T and 100Base-T connectors 273 null modem cable 275 RDP 219 serial and parallel ports 271 RDP encryption 51 VGA connector 274 Reset, hot key 17, 231...
Page 315
® T1000/T1010 Series Windows -based Terminal Administrators Guide Software Version 3.5 Written and published by: Compaq Computer Corporation, February 2001 ® ® Created using FrameMaker , Acrobat , and Magellan™...
Page 316
List of Figures T1000 Terminal Back Panel Connectors 4 T1000 Freestanding Desktop Mounting 7 T1000 Power Button 8 T1010 Terminal Back Panel Connectors 10 T1010 Freestanding Desktop Mounting 13 T1010 Power Button 14 Welcome/Countdown Dialog Box 18 IP Address Dialog Box 19 Specify an IP Address Dialog Box 20 Optional Information Dialog Box 21 Desktop and Keyboard Settings Dialog Box 22...
Page 319
List of Tables Glossary Index Text Format Conventions xxvi User Interface Menu Control xxvii T1000 Terminal Back Panel Connectors 5 T1010 Terminal Back Panel Connectors 11 Desktop and Keyboard Settings Dialog Box 23 Network Properties Sheet 45 Web Properties Sheet 49 Apps Properties Sheet 52 Default Hotkeys Properties Sheet 56 Preferences Properties Sheet 58...