Table of Contents
Advertisement
Timer Recording
Set up to 8 Programs
You can set up to 8 programs to be recorded while you are
away.
1
Press PROG to display SET
PROGRAM screen.
2
Press
to select "TIMER
PROGRAMMING."
3
Press SET to display screen.
• If a program is already in memory, press
unused program number.
4
Press
to select and SET or
to set the recording DATE.
• 1~31 = One time
• DAILY (day) = Monday~Friday
• WEEKLY (SU~SA) = Same time once a
week
Repeat step 4 to set:
• Start time, stop time
• Channel (or LINE for outside source)
• Speed (SP, SLP)
5
Press PROG to set the
program. To Enter More
Programs, press
and SET to set a blank program
number, and then repeat step
4.
6
Press PROG twice to exit this mode.
• If you're using a cable box, make sure that it is tuned to the desired
channel and the power is left on for timer recording.
• PROG TIMER indicator lights up on the unit.
26
SET PROGRAM
TIMER PROGRAMMING
ON TIMER
SLEEP TIMER: 0
SELECT:
END
:PROG
, and SET to select an
P DT START
1
-- --:-- --:--
2 -- --:-- --:--
3 -- --:-- --:--
4 -- --:-- --:--
SELECT:
END
:PROG
Example:
Today's Date
7
WEEKLY
(SA)
WEEKLY
(MO)
WEEKLY
(SU)
DAILY
(day)
P DT START
1
10
9:00a12:00p 08
2 -- --:-- --:--
3 -- --:-- --:--
4 -- --:-- --:--
to select
SET COMPLETED
CANCEL:ADD/DLT
SELECT:
END
:PROG
Review, Replace or
Clear Program Con tents :
(Recording is not in progress)
1
Press PROG to display SET
PROGRAM screen.
2
Press
PROGRAMMING."
3
Press SET to display screen.
SET:SET
4
Press
program.
STOP
CH SPD
--
--
--
--
--
--
To Replace program...
--
--
a. Press SET to display.
b. Press
SET or
SET:SET
contents.
c. Press PROG.
To Clear program...
Press ADD/DLT.
8
5
Press PROG twice to exit this mode.
31
Notes:
• 2 minutes before Timer recording is performed, "PLEASE PREPARE FOR
TIMER REC" appears and/or the PROG TIMER Indicator flashes. Be sure
1
a cassette with record tab is loaded and the unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered program
will have priority.
• If the start time for a Timer Recording comes up during a normal recording
or One Touch Recording (page 25), the Timer Recording will not be
6
performed.
• If there is a power interruption of more than one minute, the recording may
not be performed or continued.
• If "INCOMPLETE" appears after all items have been set, check all entries
STOP
CH SPD
and make necessary corrections.
SP
--
--
--
--
--
--
Cancel a Timer Re cording:
(Recording is in progress)
SET:SET
1
Hold down STOP for a few seconds to cancel the
Timer Recording.
• Any future daily or weekly recordings will be performed as
programmed.
to select "TIMER
to select the desired
to select and press
to set new program
SET PROGRAM
TIMER PROGRAMMING
ON TIMER
SLEEP TIMER: 0
SELECT:
SET:SET
END
:PROG
P DT START
STOP
CH SPD
1
10
9:00a12:00p 08
SP
2day
11:00a11:30a125
SP
3
12
8:00p 9:30p L1 SLP
4 -- --:-- --:--
--
--
CANCEL:ADD/DLT
SELECT:
SET:SET
END
:PROG
P DT START
STOP
CH SPD
1 10
9:00a12:00p 08
SP
2day
11:00a11:30a125
SP
3
12
8:00p 9:30p L1 SLP
4 -- --:-- --:--
--
--
CANCEL:ADD/DLT
SELECT:
SET:SET
EXIT
:PROG
P DT START
STOP
CH SPD
1
-- --:-- --:--
--
--
2day
11:00a11:30a125
SP
3
12
8:00p 9:30p L1 SLP
4 -- --:-- --:--
--
--
SELECT:
SET:SET
END
:PROG
Advertisement
Table of Contents
