Dolby Digital - Panasonic OmniVision PV-DF2036M Operating Instructions Manual

Selecting AUDIO OUTPUT
DVD-V
Select the digital output to be output from the optical digital audio
output connector of the unit.
1
Press ACTION in Stop mode to display MAIN MENU.
2
Press ▲▼◄► to select
"DVD."
3
Press SET to display DVD
MAIN MENU.
4
Press ▲▼ to select "AUDIO
OUTPUT."
5
Press SET to display AUDIO
OUTPUT screen.
6
Press ▲▼ to select an item.
7
Press SET repeatedly for
desired output.
LPCM (DVD)
OFF:
Linear PCM of less than 48 kHz/16 bit is output. When playing
DVDs recorded in linear PCM of over 48 kHz/20 bit, no digital
audio is output. (Factory preset)
PCM:
When playing DVDs recorded in linear PCM of 48 kHz/20
bit/24 bit or more, digital audio converted to 44.1 kHz/16 bit or
48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to 48 kHz/16 bit or
below for copyright protection.)

Dolby Digital

Bitstream:
Dolby Digital bitstream (1ch-5.1ch) is output. (Factory preset)
PCM:
When you have connected an amplifier that doesn't have a built-
in Dolby Digital decoder.
dts selection
Bitstream:
dts bitstream is output. (Factory preset)
PCM:
When you have connected an amplifier that doesn't have a built-
in dts decoder.
50
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
OFF:
Normal audio range is selected. (Factory preset)
ON:
For dynamic sound even at low volume. This is useful for late-
night listening. [Dolby Digital DVDs only].
MAIN MENU
Type of amplifier to be
connected
DVD LOCK LANGUAGE
TV CLOCK CH
No amplifier is
SELECT: SET:SET
END :ACTION
connected
AV amplifier without
Dolby Digital/dts
D V D M A I N M E N U
decoder
D I S C L A N G U A G E S
A U D I O O U T P U T
S T I L L M O D E : A U T O
T V M O D E : 4 : 3 P a n & S c a n
AV amplifier including
S E L E C T : ▲ ▼ Dolby Digital decoder
S E T : S E T
E N D : A C T I O N
AV amplifier including
Dolby Digital/dts
decoder
A U D I O O U T P U T
L P C M ( D V D ) : O F F
D o l b y D i g i t a l : B i t s t r e a m
d t s : B i t s t r e a m
*
1
D R C : O F F
S E L E C T : ▲ ▼
S E T : S E T
E N D : A C T I O N
* 2
* 3
Note:
• Make settings according to amplifier connected to optical audio output
8
DRC (Dynamic Range Compression)
LPCM
(DVD)
PCM
PCM
PCM
When connecting an amplifier (with an optical digital input connector)
which does not contain the Dolby Digital or dts decoder, be sure to
select "PCM." If "Bitstream" is selected, starting DVD play may cause
such a high level of noise as to be harmful to your ears and damage
the speakers.
When a dts decoder is connected, please select "Bitstream" in "dts." If
"PCM" is selected, there will be stereo sound.
When a Dolby Digital decoder is connected, please select "Bitstream"
in "Dolby Digital." If "PCM" is selected, there will be stereo sound.
as shown in above table.
Press ACTION to redisplay DVD MAIN MENU and go
to step 4 to set up another item. Or, press ACTION
three times to exit.
Recommended setting
Dolby
dts
Digital
PCM* PCM*
1 1
Bitstream* PCM
3
Bitstream* 3 Bitstream* 2