Panasonic Toughbook CF-S9KWAZG1M Reference Manual page 61

Sleep/Standby or Hibernation Functions
Do not enter
Windows 7
be corrupted, sleep or hibernation may not work, or malfunction may occur in the computer or the peripheral devices.
• When any of the hard disk drive indicator
• <CF-F9/CF-S9 Series>
When the CD/DVD drive indicator is blinking (the drive is being accessed).
• When playing/recording audio files or displaying DVD-Video such as MPEG files.
• When playing a DVD-Video.
• When writing to a disc.
• When using communication software or network function.
• When using peripheral devices.
(If peripheral devices fail to work normally, restart the computer.)
The computer does not enter
approximately one minute.
When the Wake up from wired LAN function is enabled (the function is enabled in the default setting), battery consumption
will increase while in standby or hibernation.
Windows XP
The computer does not enter standby or hibernation immediately after resuming. Wait approximately one minute.
Entering/Resuming from Sleep/Standby or Hibernation
To enter sleep/standby or hibernation
1
Close the display, or slide the power switch (A) until a beep
<CF-C1 Series>
Sleep/
Windows 7
Hibernation: The power indicator (A) goes off.
You can alternatively use the Windows menu to enter
Windows 7
Click (Start) -
sleep/ standby or hibernation in the conditions below, otherwise the data or file may
Windows XP
and the SD Memory Card indicator
sleep/
Windows 7
Windows XP
<CF-F9 Series>
A
Standby: The power indicator (A) blinks green.
Windows XP
- [Sleep] / [Hibernate].
standby or hibernation immediately after resuming. Wait
*1
<CF-S9 Series>
sleep/
Windows 7
Windows XP
61
is on (accessing drive or card).
sounds.
standby or hibernation.