Panasonic UF-490 Software Manual page 14

Configuring the Printer Driver Settings
Windows 95/98/Me
Details Tab
1. Print to the following port
Displays either the port to which the printer is connected or the path to the network printer.
To change the printing destination, either select the printing destination port from the list or enter the
network path here.
2. Print using the following driver
Displays the type of the printer driver. Specify the printer being used or a printer model which can be
emulated with the printer being used.
3.
Capture Printer Port...
Assigns a port to the network drive or cancels a port assigned to the network drive.
4. Timeout settings - Not selected
Specify the amount of time (in seconds) allowed to elapse before the printer becomes online. If the printer
is not online within this duration, an error message will be displayed.
5. Timeout settings - Transmission retry
Specify the amount of time (in seconds) allowed to elapse before the printer is ready for printing. If the
printer is not ready for printing within this duration, an error message will be displayed.
Increase this value if a timeout error occurs when printing a large document.
6.
Add Port...
Adds/deletes a new port or a new network path.
7.
New Driver...
Updates or modifies the printer driver.
8. Spool Settings...
Specify the method of sending (spool) documents from the program to the printer.
14
/
End Capture...
/ button
Delete Port...
button
button
button