Panasonic WORKIO DP-130 Operating Instructions Manual page 62

Configuring the Printer Driver Settings
Windows 2000/XP (Administrator)
2. Duplex Unit (For DP-2000/2500)
Check this checkbox if the Automatic Duplex Unit (DA-MD200) is installed.
Duplex printing function is enabled.
3. Output Tray (For DP-2000/2500/3000)
If Exit Tray (Inner) and Dual-Path Exit Guide Unit (DA-XN200/FK200) are installed, select inner option.
This allows specifying Inner 1 and Inner 2 as output bins for printer output.
If 1-Bin Finisher or Exit Tray (Outer) (DA-FS200/XT200) is installed, select inner option + outer option.
This allows specifying inner 1, inner 2, and outer as output bins for printer output. Also, stapling function
becomes available if inner option and outer option are enabled.
4. Number of Paper Tray
Select the number of available paper trays for the printer if an optional Paper Feed Module is installed.
5. Printer/Fax Memory (For DP-1810F/2000/2500/3000)
Select the size of the Expansion Flash Memory Card or whether a Fax Option (2MB) has been installed,
to enable Security Print.
6. Security Print Password (For DP-1810F/2000/2500/3000)
Set the password for Security Print, to enable the feature.
NOTE
62
1. Device Settings Tab specifies device-specific settings and settings of optional devices. Refer
to operation manuals of the optional devices, or on-line manuals for settings items.
2. Settings specified in this section are saved as standard (default) settings of the printer.