Panasonic WJ-ND300A Setup Instructions page 54

Screenshot 2
The "Program Setup" window will be displayed.
Setup items
I Copy the Other Program Setup
When it is necessary to copy the settings of the other
program, select the desired program (source of the set-
tings) and click the [Copy] button.
Important:
Only the currently displayed page (the selected pro-
gram) can be copied.
I RECORDER SETUP
Perform the settings such transmission rate of "LIVE
VIDEO" for each camera channel, and recording rate of
each recording type, etc.
[LIVE VIDEO]
Select the transmission rate of live images.
When OFF is selected, live image transmission will not
be performed.
OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/
5 ips/10 ips/15 ips/ALL/I-Frame
[MANUAL REC]
Select the recording rate for manual recording.
OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/
5 ips/10 ips/15 ips/ALL/I-Frame
OFF: Manual recording will not be performed.
[SCHEDULE REC]
Select the recording rate for schedule recording from
the following.
OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/
5 ips/10 ips/15 ips/ALL/I-Frame
OFF: Schedule recording will not be performed.
54
Step 2
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
When the [camera 17-32] button is clicked, the setting
window for camera 17-32 will be displayed.
Step 3
Click the [SET] button after completing the settings, and
close the window by clicking the [×] button at the top
right of the window.
[EVENT REC]
Performs the settings for the recording rate and record-
ing duration for pre-event recording and post-event
recording.
The following are available for "RATE" (recording rate).
0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/5 ips/
10 ips/15 ips/ALL/I-Frame
OFF: No recording will be performed.
Important:
• Depending on the network environment or the size
of images to be recorded, the recording duration of
the recorded data may not be exactly same as set
recording duration for the pre-event recording.
• Depending on the timing of an event occurrence, the
recording duration of the recorded data may not be
exactly same as set recording duration for the post-
event recording.
Notes:
• "ALL" is unavailable for the recording rate of pre-
event recording when the compression method of
the camera is MPEG-4.
• When the image compression method of the camera
is "MPEG-4" or when selecting "0.5 ips" or less for
the recording rate, it is necessary to select "10 s" or
longer for the recording duration.
The following recording duration can be set.
• Pre-event recording (PRE-EVENT)
1 - 10 s (in 1-second interval)/20 s/30 s/1 - 10 min
(in 1-minute interval)/20 - 60 min (in 10 minutes
intervals)