Samsung HP-T4264 Owner's Instructions Manual
Samsung hp-t4264: user guide
Hide thumbs
Also See for HP-T4264:
- Safety instructions (8 pages) ,
- Manual (2 pages) ,
- Owner's instructions manual (113 pages)
Table of Contents
Related Manuals for Samsung HP-T4264
Summary of Contents for Samsung HP-T4264
-
Page 1: Plasma Display
HP-T4264 HP-T5064 PLASMA DISPLAY Owner’s Instructions Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference. ▪ Model _______________ ▪ Serial No. _______________... -
Page 2: Important Warranty Information Regarding Television Format Viewing
On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty. U.S.A Only The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. -
Page 3: User Instructions
User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 26 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image. -
Page 4: Table Of Contents
■ Listening to the Sound of the Sub (PIP) Picture ..37 ■ How to assemble the Stand-Base (depending on the model) ........... 78 ■ Specifications ............... 78 ■ Dimensions (HP-T4264) ..........79 ➢ ■ Dimensions (HP-T5064) ..........80 Symbols... -
Page 5: General Information
General Information List of Features • Adjustable picture settings that can be stored in the TV’s memory. • Automatic timer to turn the TV on and off. • A special sleep timer. • V-Chip function. • Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top Box needed. -
Page 6: Viewing The Control Panel
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. ➢ The product color and shape may vary depending on the model. -
Page 7: Viewing The Connection Panel
Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 9-14. The product color and shape may vary depending on the model. audio inputs on your TV allow you to receive left and right 1 POWER IN Connect the supplied power cord. -
Page 8: Remote Control
(Refer to page 63 (JPEG), 69 (MP3)) 5 ANTENNA c REC Press to select “AIR” or “CABLE”. This remote can be used to control 6 VCR/DVD Functions recording on Samsung recorders. - Rewind (Refer to page 74) - Stop - Play/Pause - Fast/Forward Press to change channels. -
Page 9: Installing Batteries In The Remote Control
Installing Batteries in the Remote Control Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the ➢... -
Page 10: Connecting Cable Tv
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box Plug the incoming cable into the ANT 2 IN(CABLE) terminal on the back of the TV. ➢ Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. -
Page 11: Connecting A Vcr
If your VCR is stereo, you must connect two cables. S-Video Connection Your Samsung TV can be connected to the S-Video jack of a VCR. (This connection delivers a better picture when compared to the regular Video connection above.) To begin, follow steps 1–3... -
Page 12: Connecting A Camcorder
Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR Connect a Video Cable TV Side Panel (or S-Video Cable) between the AV IN 2 [VIDEO] (or S-VIDEO) jack on the TV S-Video Cable(Not supplied) -
Page 13: Connecting A Dvd Player/Set-Top Box Via Hdmi
Connecting a DVD Player/Set-Top Box via HDMI This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. Connect an HDMI Cable between the HDMI IN 2 on TV Rear Panel DVD Player / Set-Top Box the TV and the HDMI OUT on... -
Page 14: Connecting A Digital Audio System
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV. Connect an Optical Cable Digital Audio System between the DIGITAL AUDIO TV Rear Panel OUT (OPTICAL) jacks on the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System. -
Page 15: Operation
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. It may take a while when your TV starts. ➢ Plug & Play Feature When the TV is initially powered On, basic settings proceed automatically and subsequently: Press the POWER button on the remote control. - Page 16 The TV will begin memorizing all of the available channels. Plug & Play After all the available channels are stored, the Auto program menu reappears. Auto Program in progress. Cable Channel 67 Press the ENTER button when channel memorization is complete. Clock Mode menu is automatically displayed.
-
Page 17: Changing Channels
If you want to reset this feature... Setup Plug & Play ► Press the MENU button to display the menu. Language : English ► Time ► Press the ▲ or ▼ button to select Setup, then press the ENTER button. Game Mode : Off ►... -
Page 18: Adjusting The Volume
Adjusting the Volume Using the Volume Buttons Press the VOL + or VOL – button to increase or decrease the volume. Using the Mute Button At any time, you can cut off the sound using the MUTE button. Press MUTE and the sound cuts off. The word “Mute”... -
Page 19: Memorizing The Channels
Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (air) and cable channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. -
Page 20: Setting Up Your Remote Control
Setting Up Your Remote Control After your remote control has been properly set up, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch among these modes, and control whichever piece of equipment you choose. - Page 21 Setting Up the Remote to Operate Your DVD Turn off your DVD. Press the DVD button on your TV’s remote control. Press the SET button on your TV’s remote control. Using the number buttons on your remote control, enter three digits of the DVD code listed on page 24 of this manual for your brand of DVD.
-
Page 22: Remote Control Codes
Remote Control Codes Brand Code Brand Code SAMSUNG 000 001 002 003 004 005 077 078 079 MITSUBISHI 019 034 041 046 ADMIRAL MONTGOMERY WARD AIWA 002 025 AKAI 004 027 032 MULTITECH 002 005 025 038 AUDIO DYNAMICS 007 026 007 008 018 026 037 062 064 BELL&HOWELL... -
Page 23: Cable Box
019 021 023 028 PIONEER 004 018 020 044 WARNER AMEX 014 022 040 ZENITH 017 029 035 037 045 REGAL SAMSUNG SET-TOP BOX Product Code Product Code Ground wave STB 001 002 Satellite STB HDD COMBO Premium Satellite STB... - Page 24 SAMSUNG DVD Product Code Product Code 000 001 002 Home Theater VCR COMBO 014 015 016 DVDR 003 004 HDD Record COMBO BD Record 005 006 TWIN TRAY COMBO VCR COMBO 007 008 009 010 011 STB DVD COMBO VCR Record...
-
Page 25: To Select The Source
To Select the Source Use to select TV or other external input sources such as DVD players or Set-top/Cable boxes connected to the TV. Use to select the input source of your choice. Press the MENU button to display the menu. Press the ▲... -
Page 26: Picture Control
Picture Control Using Automatic Picture Settings Your TV has three automatic picture settings (“Dynamic”, “Standard”, and “Movie”) that are preset at the factory. You can activate either Dynamic, Standard, or Movie by making a selection from the menu. Press the MENU button to display the menu. Press the ▲... -
Page 27: Digital Noise Reduction
Picture Press the ENTER button to return to Picture. ▲ More Color Tone : Cool1 ► Press the ▲ or ▼ button to select Color Tone, then press the ENTER button. Detailed Settings ► Size : 16:9 ► Digital NR : Auto ►... -
Page 28: Changing The Screen Size
Changing the Screen Size Screen size selection depends on the type of video input. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Picture, then press the ENTER button. Press the ▲ or ▼ button to select Size, then press the ENTER button. Press the ▲... -
Page 29: Configuring Detailed Settings On The Picture
Making Detailed Picture Settings You can set detailed picture settings. Picture ▲ More Color Tone : Cool1 ► Press the MENU button to display the menu. Detailed Settings ► Size : 16:9 ► Press the ▲ or ▼ button to select Picture, then press the ENTER button. Digital NR : Auto ►... -
Page 30: Active Color
Active Color If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more vivid on-screen picture. Press the MENU button to display the menu. Picture Press the ▲ or ▼ button to select Picture, then press the ENTER button. ▲... -
Page 31: Selecting The Film Mode
Selecting the Film Mode Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality. Press the MENU button to display the menu. Setup Press the ▲ or ▼ button to select Setup, then press the ENTER button. ▲... -
Page 32: Viewing Picture-In-Picture
Viewing Picture-in-Picture This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV channel in the main screen, and a different one in the PIP screen. Please see ‘PIP Settings’ below for details. -
Page 33: Freezing The Current Picture
Changing the Position of the PIP Window Press the ▲ or ▼ button to select Position, then press the ENTER button. Press the ▲ or ▼ button to select the desired PIP window position, then press the ENTER button. ➢ In Double Window ( ) and Double Wide ( ) modes, Position cannot... -
Page 34: Sound Control
Sound Control Using Automatic Sound Settings Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, “Speech”, and “Custom”) that are preset at the factory. Or, you can select “Custom”, which automatically recalls your personalized sound settings. Press the MENU button to display the menu. Press the ▲... -
Page 35: Setting The Trusurround Xt
Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multi channel formats. Press the MENU button to display the menu. -
Page 36: Choosing A Multi-Channel Sound (Mts) Track - Analog
Choosing a Multi-Channel Sound (MTS) Track - Analog Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP. Multi-Track Sound Sound Mode : Custom ► Press the MENU button to display the menu. Equalizer ► SRS TruSurround XT : Off ►... -
Page 37: Adjusting The Melody Sound
Press the ▲ or ▼ button to select Off or On, then press the ENTER button. Sound Mode : Custom Press the EXIT button to exit. Equalizer SRS TruSurround XT : Off ➢ • When Internal Mute is set to On, Sound menus except Multi-track Options Multi-Track Options cannot be adjusted. -
Page 38: Button
Channel Control Selecting the Antenna Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ENTER button to select Antenna. Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button. Press the EXIT button to exit. -
Page 39: Setting Your Favorite Channels
Press the ▲/▼/◄/► buttons to select a channel to delete, then press the ENTER button. Press the ▲ or ▼ button to select Delete, then press the ENTER button to delete the channel. Press the EXIT button to exit. • Red (P.MODE) button: Press repeatedly to select All, Added, or Favorite. •... -
Page 40: Viewing The Channel Lists
Viewing the Channel Lists You can display a list of all channels, added channels or your favorite channels. Channel Antenna : Air ► Press the MENU button to display the menu. Auto Program ► Press the ▲ or ▼ button to select Channel, then press the ENTER button. Clear Scrambled Channel ►... -
Page 41: Labeling Channels
Labeling Channels Channels can labeled so that their call letters appear whenever the channel is selected. Press the MENU button to display the menu. Channel Press the ▲ or ▼ button to select Channel, then press the ENTER button. Antenna : Air ►... -
Page 42: Checking The Digital-Signal Strength
Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. -
Page 43: Pc Display
✔ ➢ • For the HP-T4264, PC text quality is optimum in XGA mode (1024 x 768@60Hz). • For the HP-T5064, PC text quality is optimum in WXGA mode (1360 x 768@60Hz). (Three pixels on left, right, top and bottom will be grayed out at the resolution setting of 1360x768@60Hz. This is not a mechanical problem but a result caused by the pixel difference between the standard resolution and the PDP panel.) -
Page 44: Setting Up The Tv With Your Pc
Setting up the TV with your PC Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. How to Auto Adjust Setup ▲... -
Page 45: Setting The Home Theater Pc
Changing the Screen Position After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned. Image Lock ► Position ► ➢ Change to the PC mode first. Auto Adjustment Image Reset Press the MENU button to display the menu. Press the ▲... -
Page 46: Time Setting
Time Setting Setting the Time Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually Press the MENU button to display the menu. - Page 47 Option 2: Setting the Clock Automatically Setup The Clock can be set automatically if you are receiving a digital signal. Plug & Play ► Language : English ► Press the MENU button to display the menu. Time ► Press the ▲ or ▼ button to select Setup, then press the ENTER button. Game Mode : Off ►...
- Page 48 Setting the On/Off Timer Use this feature to set the TV to turn on or off at a desired time. You must set Setup the clock first. Plug & Play ► Language : English ► Press the MENU button to display the menu. Time ►...
-
Page 49: Function Description
Function Description Selecting a Menu Language Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Press the MENU button to display the menu. Setup Press the ▲... -
Page 50: Viewing Closed Captions (On-Screen Text Messages) - Digital
Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Caption, then press the ENTER button. Press the ENTER button to select Caption. -
Page 51: Viewing Closed Captions (On-Screen Text Messages) - Analog
Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) Press the MENU button to display the menu. Press the ▲... -
Page 52: Menu Transparency Level
Menu Transparency Level Adjusts the transparency of the menu screen. Press the MENU button to display the menu. Setup Press the ▲ or ▼ button to select Setup, then press the ENTER button. Plug & Play ► Language : English ►... -
Page 53: Using The Energy Saving Feature
Using the Energy Saving Feature This feature adjusts the power consumption of the unit in order to save energy. Press the MENU button to display the menu. Setup Press the ▲ or ▼ button to select Setup, then press the ENTER button. ▲... -
Page 54: Reducing The Effects Of Screen Burn
Reducing the Effects of Screen Burn If screen burn has occurred, you can select a white screen or scrolling to help remove screen burn artifacts. Press the MENU button to display the menu. Screen Burn Protection Press the ▲ or ▼ button to select Setup, then press the ENTER button. Pixel Shift ►... -
Page 55: Wall- Mount Adjustment (Sold Separately)
Wall- mount adjustment (Sold separately) Once the wall mount is installed, the position of your TV can be easily adjusted. Auto Wall-Mount TV Rear Panel EX-LINK Cable (Not supplied) Entering the menu Setup Press the MENU button to display the menu. ▲... -
Page 56: Upgrading The Software
Upgrading the Software Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on the side of your TV. - Page 57 The V-Chip screen will appear. V-Chip Press the ▲ or ▼ button to select Change PIN, then press the ENTER button. V-Chip Lock : Off ► TV Parental Guidelines ► The Change PIN screen will appear. Choose any 4 digits for your PIN and MPAA Rating ►...
- Page 58 The V-Chip screen will appear. Press the ▲ or ▼ button to select TV Parental V-Chip Guidelines, then press the ENTER button. V-Chip Lock : On ► TV Parental Guidelines ► MPAA Rating ► The TV Parental Guidelines screen will appear. Canadian English ►...
- Page 59 How to Set up Restrictions Using “MPAA Ratings” (G, PG, PG-13, R, NC-17, X, NR ) The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
- Page 60 The V-Chip screen will appear. Press the ▲ or ▼ button to select Canadian V-Chip English, then press the ENTER button V-Chip Lock : On ► TV Parental Guidelines ► MPAA Rating ► Canadian English ► Canadian French ► Downloadable U.S. Rating ►...
- Page 61 Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. Setup Press the MENU button to display the menu. Plug & Play ► Language : English ► Press the ▲ or ▼ button to select Setup, then press the ENTER button. Time ►...
-
Page 62: Wiselink
➢ Before inserting your memory card or USB device into the TV, please back up your files. SAMSUNG is not responsible for any data file damage or data loss. ➢ The data files in memory cards might be erased due to electrostatic discharge (EST), loose contact, or dust. -
Page 63: Using The Wiselink Mode
Using the WISELINK Mode Press the MENU button to display the menu. Input Press the ENTER button to select Input. Source List : TV ► Press the ▲ or ▼ button to select WISELINK, then press the ENTER button. Edit Name ►... -
Page 64: Using The Photo (Jpeg) List
Using the Photo (JPEG) List You can play back the JPEG files saved on a memory device in various ways. After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 63) Press the ◄ or ► button to select Photo, then press the ENTER button. JPEG files and existing folders are displayed. - Page 65 Using the Options Menu Start Slide Show: Starts a slide show. (Refer to Viewing a Slide Show on page 66) Rotate: You can rotate images in full screen mode. Images are rotated in the order of 90°, 180°, 270° and 0° (original state). (Refer to Rotating on page 68) You cannot save a rotated image.
- Page 66 Viewing a Slide Show After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 63) Press the ◄ or ► button to select Photo, then press the ENTER button. JPEG files and existing folders are displayed. Press the INFO button to display the option (Start Slide Show, Deselect All).
- Page 67 Using the Menu during a Slide Show Slide show Speed: Select to control the slide show speed. Each time the ENTER button is pressed, the speed changes repeatedly. (Normal → Slow → Fast) Background Music: Select to choose whether you want to play MP3 file during a slide show. Each time the ENTER button is pressed, the background music activation changes repeatedly.
- Page 68 Rotating After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 63) Photo CELLDISK2.0 Press the ◄ or ► button to select Photo, then press the ENTER button. 315MB/495MB Free JPEG files and existing folders are displayed. Photo Music Setup...
- Page 69 Zooming-In After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 63) Press the ◄ or ► button to select Photo, then press the ENTER button. JPEG files and existing folders are displayed. Press the ▲/▼/◄/►...
-
Page 70: Using The Music (Mp3) List
Using the Music (MP3) List You can play back the MP3 files saved on a memory device in various ways. After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 63) Press the ◄ or ► button to select Music, then press the ENTER button. MP3 files and existing folders are displayed. -
Page 71: Using The Setup Menu
Using the Setup Menu Setup displays the user settings of the WISELINK menu After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 63) Press the ◄ or ► button to select Setup, then press the ENTER button. The Setup menu is displayed. -
Page 72: About Anynet
Connecting Anynet + Devices The Anynet + system can be used only with Samsung AV devices that have the Anynet + feature. To be sure your Samsung AV device has this feature, check if there is an Anynet + mark on it. -
Page 73: Setting Up Anynet
Setting Up Anynet + The following settings are to use Anynet + functions. To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On TV Air 28 Press the Anynet + button. Recevier: Press the ▲ or ▼ button to select Setup, then press the ENTER button. Connect Recorder Setup Press the ENTER button to select Anynet+ (HDMI-CEC), then press the... -
Page 74: Recording
Anynet + Menu The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV. Anynet + Menu Description Switches from Anynet + to TV broadcast mode. View TV Record Starts a recording. (This menu works only for a device supporting recording.) (Device_Name) Menu Shows the menu of the connected device. -
Page 75: Listening Through A Receiver
Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker. Press the Anynet + button. TV Air 28 Press the ▲ or ▼ button to select Receiver, then press the ENTER button. Recevier: Connect Recorder Press the ◄... -
Page 76: Appendix
Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Possible Solution Poor picture quality. Try another channel. -
Page 77: Installing The Wall Mount Kit
Installing the Wall Mount Kit This installation is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer. Wall Mount Kit Specifications ( VESA ) Product Family inch VESA Spec. -
Page 78: How To Assemble The Stand-Base (Depending On The Model)
➢ the TV. Never lay the TV on the floor because of possible damage to the screen. Always store the TV upright. Specifications Model Name HP-T4264 HP-T5064 Screen Size (Diagonal) 42 inch 50 inch PC Resolution 1024 x 768 @ 60 Hz... -
Page 79: Dimensions (Hp-T4264)
Dimensions (HP-T4264) TOP VIEW FRONT VIEW JACK PANEL DETAIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM SIDE VIEW REAR VIEW English - 79... -
Page 80: Dimensions (Hp-T5064)
Dimensions (HP-T5064) TOP VIEW FRONT VIEW JACK PANEL DETAIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM SIDE VIEW REAR VIEW English - 80... - Page 81 This page is intentionally left blank.
- Page 82 This page is intentionally left blank.