To manually set the COM port:
NOTE:
If you are currently connected to your Bluetooth device you must
disconnect before manually setting the COM port or the baud rate.
Tap Options, tap GPS Options, tap COM Port and then tap a port
1
(COM 1 to COM 9). The Bluetooth Browser screen appears.
Tap the appropriate Bluetooth device. All GPS receivers contain GPS
2
in their identifier. The Map view appears.
To manually set the baud rate:
NOTE:
If you are currently connected to your Bluetooth device you must
disconnect before manually setting the COM port or the baud rate.
Tap Options, tap GPS Options, tap baud rate and then tap a baud
1
rate (4800 to 115200). The Bluetooth Browser screen appears.
30
Owner's Manual