Advertisement
Telephone Programming
Navigating through Telephone Programming
Use the following guidelines when using the DSX telephone programming.
22- and 34-Button Keyset
Navigation (Line 1)
Use this line to select the program, option, port, extension, or table you want to customize. After entering the
programming mode and selecting a program (e.g. 2104-01), Navigation (line 1) shows:
• The program ( 2104 ) and option number ( 01 ).
• The port's extension number - if any ( Ext-300 )
• The station, line, COS, or table number ( Sta-001 ).
To advance to the option line (for editing data):
While the option is flashing (e.g., 01 in the above example), press HOLD twice.
1.
• Pressing Volume up and Volume down will scroll through the options for the selected port.
To select another extension and advance to the option line (for entering data):
1.
While the option is flashing (e.g., 01 in the above example), press HOLD + Enter extension number + HOLD .
To navigate by extension or station instead of option:
While the option is flashing (e.g., 01 in the above example), press
1.
• Select either the extension number or station port.
Press Volume Up and Volume Down to scroll through the same option for stations or extensions, depending on
2.
which you selected.
3.
Press
or HOLD to advance (drill down to) the option.
[Select]
HOLD
or
Advance (drill down to) Options .
[Select]
Sequentially back up (and out) of programming.
SPEAKER
• SPEAKER normally flashes green. In the data entry mode it flashes red.
Sequentially back up (and out) of programming.
[Back]
2 ◆ Telephone Programming
Navigation
Option
Soft Keys
Flashing
Cursor
Navigation (Line 1)
[ ] = Soft Key
[>>]
Key Options
Super Display Keyset
or TRANSFER .
DSX Programmer's Quick Reference
Advertisement
