Advertisement
Connect the USB PC Link cable from the MobilePro 900 to the host
4.
PC. Microsoft Windows now detects the new hardware (USB device).
Click Next to install the USB drivers. The installation prompts you for
5.
the
wceusbsh.sys
Browse to the appropriate directory on the Application and Driver CD
6.
for your operating system (Win2K USB Driver or WinXP USB Driver).
Select the
7.
installation.
Connecting a Device to the USB Port
Before connecting a USB device to the MobilePro 900, install a ferrite core on
the USB cable. Installation of the ferrite core on the USB cable reduces radio
interference when you use a USB device connected to the MobilePro 900. Ferrite
cores ship with the MobilePro 900.
Note
The USB PC Connect cable that ships with the MobilePro 900
comes with a ferrite core installed. You do not need to install a ferrite core on
this cable.
Install a ferrite core on any other USB cable you connect to the MobilePro,
including the cable attached to a USB mouse or USB keyboard.
device, be sure the USB cable has a ferrite core installed.
Use the following procedure to install the ferrite core.
Locate one of the ferrite cores that ships with the MobilePro 900.
1.
2 NEC MobilePro 900 Release Notes
file.
file and click "Open" to complete the driver
wceusbsh.sys
To reduce radio interference when using a USB
Ferrite Core
Advertisement
