Removing A Media Memory Card Or Blank - Dell XPS 140M Owner's Manual

To install a media memory card:
1 Hold the card with the top side of the card facing up.
2 Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and
try again.
1
5-in-1 media memory card
slot
The computer recognizes the media memory card and automatically loads the appropriate
device driver. If the configuration program tells you to load the manufacturer's drivers, use the
CD that came with the media memory card, if applicable.

Removing a Media Memory Card or Blank

NOTICE:
card and stop it from functioning before you remove it from the computer. If you do not stop the card in
the configuration utility, you could lose data.
CAUTION:
Product Information Guide
Press the card in to release and remove the card or blank.
Save a blank to use when no media memory card is installed in the slot. Blanks protect unused
slots from dust and other particles.
72
Using the 5-in-1 Media Memory Card Reader
2
Use the media memory card configuration utility (click the
Before you begin any of the procedures in this section, follow the safety instructions in the
.
media memory card
1
2
icon in the taskbar) to select a