NEC VERSA FX Installation Manual page 4

Installing the Standard or Extended Life Main Battery Pack
Install your main battery as follows:
Note
Using a combination of very old and new batteries can deteriorate battery and
equipment performance.
1. Locate the alignment groove on the edge of the main battery.
2. Locate the alignment groove inside the battery bay.
Align the grooves on the battery with the grooves in the bay.
3.
Slide the battery into the bay until securely locked into place. See the figure that
4.
corresponds to your new battery.
A – Battery Bay Connectors
B – Battery Bay Release Latch
A – Battery Bay Connectors
B – Battery Bay Release Latch
5. Turn over the system.
6. Take the system out of Standby mode by sliding the power button to the right.
Fully charge the new battery the first time you charge it (see the section, "Charging the
7.
Battery"). Also see the section, "Battery Precautions" for important safety information.
4 NEC Versa FX Battery Packs
Inserting the Standard main battery pack
Inserting the Extended Life main battery pack
C – Alignment Grooves
D – Standard Main Battery
C – Alignment Grooves
D – Extended Life Main Battery