Advertisement
of the CD-ROM drive – (your CD-ROM drive will most likely be E:).
3. Double click on the Setup icon. The Setup Wizard guides you through the
installation process. Answer all prompts appropriately.
your particular needs and system configuration. Use the
following guidelines.
T
During the Windows 98 upgrade process you are prompted
to decide if you want to back up your Windows 95 system
files. Keep in mind that approximately 50 MB of hard drive
space will be consumed by doing so. NEC recommends
that you back up your system files.
T
Also during the Windows 98 upgrade process you are
prompted to make a Windows 98 bootable Startup diskette,
which loads CD-ROM drivers. If your system cannot run
both a floppy drive and a CD-ROM drive at the same time,
skip this section by selecting "Cancel" at the "Insert
diskette" screen. You can create a start-up diskette at any
time by going to the Control Panel, Add/Remove
Programs, selecting the "Windows Setup" tab, and
pressing the "Create Disk..." button.
Monitor Settings
After the Windows 98 upgrade is completed and your system restarts, you may
find the LCD image is not set to the correct resolution for your screen. You need
to reset the video resolution using the following steps.
1. Access the Display icon in the Control Panel (through Start, Settings...).
2. In Display properties, click Settings tab, select Advanced, select Monitor and
then change it to either Laptop Display Panel 800x600 (for SVGA models) or
Laptop Display Panel 1024x768 (for XGA models) depending on your system
screen size.
3. Press
Apply
4. When the system has restarted, access the Display icon and reset the video
resolution to 800x600 or 1024x768 depending on your system and your
specific display requirements.
USB Drivers
Windows 98 provides a comprehensive set of USB device drivers as part of the
installation process. Do not install the USB drivers from the NEC Versa
Applications and Drivers CD after you have performed the Windows 98 upgrade.
These USB drivers are for Windows 95.
2 NEC Versa LX/SX Windows 98 Upgrade Information
Note:
You must make two key decisions depending on
and
, then restart your system.
Close
Advertisement
