NEC Versa LXi
Installing the NEC VersaBay III CD-RW/DVD Drive
Follow these steps to install the NEC VersaBay III CD-RW/DVD drive in the
NEC VersaBay III.
1.
Save your files.
2.
Shut down Windows and power off the NEC Versa.
Close the LCD panel and locate the VersaBay III on your system. For NEC VersaBay III
3.
locations, see the previous section, "Removing a Device from the NEC VersaBay III."
4.
If there is an NEC VersaBay III device in the NEC VersaBay III, refer to the instructions in
the previous section, "Removing a Device from the NEC VersaBay III."
Turn the NEC Versa upside down and locate the release lock and the release latch (see the
5.
figure on the previous page).
6.
Slide the release lock to the unlocked position. Slide and hold the release latch in the
unlocked position.
Align and install the device into the NEC VersaBay III.
7.
4 NEC VersaBay III CD-RW/DVD Drive
Sliding a device out of the NEC VersaBay III
NEC Versa SXi