Figure 3-11. Scan Dialog Box
The dialog box contains a list of all devices attached to your appliance. Click the checkbox
3
next to the devices you wish to scan.
or
Double-click on a device name or port.
or
Press <Alt> and the number of the device you wish to scan. You can select up to 16
devices from the entire list.
In the Time box, type the number of seconds (from 3 to 99) of desired time before the scan
4
moves to the next device in the sequence.
Click OK.
5
To remove a device from the scan list:
In the Scan dialog box, select the device to be removed.
1
or
Double-click on the device name or port.
or
Click the Clear button to remove all devices from the scan list.
Click OK.
2
To start the scan mode:
®
If the OSCAR
interface is not open, press <Print Screen>
1
Click Commands. The Commands dialog box displays.
2
Select Scan Enable in the Commands dialog box.
3
Click X to close the Commands dialog box.
4
NOTE:
Scanning begins when the Main dialog box or flag is displayed. Scanning is inhibited in any other
®
OSCAR
interface dialog box.
The Main dialog box appears.
.
Basic Operations
39