Table of Contents
Advertisement
Figure 3-18. Diagnostics Dialog Box
NOTE:
A SIP may appear to be offline while it is being upgraded.
Next to each item to be tested, you will see a pass (green circle) or fail (red x) symbol display to the
left of each item as that test finishes. The following table details each of the tests.
Table 3-5. Diagnostic Test Details
Test
Memory Tests
Firmware CRCs
Comm Interfaces
Switch Controller test
On-line SIPs
Offline SIPs
Suspect SIPs
To run diagnostic tests:
If the OSCAR interface is not open, press <Print Screen>. The Main dialog box appears.
1
Click Commands
2
be disconnected.
Description
Reports on the condition of the main board RAM
Validates the current firmware images stored in the
system's FLASH
Validates internal communication pathways
Verifies the switch matrix controller is accessible
and functional
Indicates the total number of currently connected and
powered SIPs
Indicates the number of SIPs that have been connected
successfully in the past and are apparently powered down
Indicates the number of SIPs that have been detected,
but are either unavailable for connection or have dropped
packets during the ping tests
Run Diagnostics. A warning message appears indicating that all users will
-
41
Basic Operation
Advertisement
Table of Contents
