Dell Dimension 2100 System Reference Manual page 23

DMA 1 Error
DMA 2 Error
FDD Controller
Failure
HDD Controller
Failure
INTR1 Error
INTR2 Error
Invalid Boot
Diskette
KB/Interface Error
KeyboardError nn
No ROM Basic
System Setup Program: Dell™ Dimension™ 2100
System Reference
Overview
Entering the System Setup Program
BIOS cannot communicate
with the floppy drive or
hard drive controller.
Interrupt channel on the
system board failed the
POST.
The operating system
cannot be located on drive
A or drive C.
An error occurred with the
keyboard connector.
The BIOS has detected a
stuck key represented by
scan code nn.
The operating system
cannot be located on drive
A or drive C.
Ensure that the
correctly in the computer frame and
defined correctly in
program. Check the interface cable
at both ends.
The keyboard or
need to be replaced.
Enter the system setup program
confirm that drive A or drive C is
properly identified.
The keyboard or
need to be replaced.
Make sure that nothing is resting on
the keyboard; if a key appears to be
stuck, carefully pry it up. If the
problem persists, you may need to
replace the keyboard.
Enter the system setup program
confirm that drive A or drive C is
properly identified.
Security Screen
Boot Screen
drive is installed
thesystem setup
system board may
and
system board may
and