Dell Dimension 2100 Solution Manual page 89

Rotate the power supply (see page 62).
3
NOTICE: To avoid damage to the system board while you pry the battery
loose, be sure to insert the plastic screwdriver between the battery and the
socket (not the system board).
Locate the battery socket BATTERY (see page 66) and pry the battery
4
out of its socket with your fingers or with a plastic screwdriver.
Insert the battery into the socket with the side labeled "+" facing up.
5
battery socket
(BATTERY)
Rotate the power supply back into place (see page 64).
6
Replace the computer cover (see page 80), and plug your computer
7
and devices into their electrical outlets.
Access the system setup program and restore the settings you recorded
8
in step 1.
battery
Appendix 89