3.5-Inch Devices - Dell Dimension 4100 Solution Manual

3.5-Inch Devices

CAUTION: Before you begin any of the procedures in this section,
follow the safety instructions on page 7.
NOTICE: To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network jack.
Turn off the computer and devices, and disconnect them from their
1
electrical outlets.
Briefly press the power button.
2
Pressing the power button when the computer is not connected to an
electrical outlet discharges residual electricity and can help prevent
system board damage.
Remove the computer cover (see page 42).
3
Press in the tabs, and swing the front panel away from the computer.
4
tabs (3)
front
panel
63
Ad d i ng Part s