Mitsubishi Electric LDTV152 - 52IN LCDtv 1920X1080 10000:1 S-vid Comp-vid USB Owner's Manual page 63

Setting Up Net Command Control of an A/V Receiver, continued
Audio Switching Setup 2: Automatic A/V Receiver
Switching to a Surround Sound Device
Use this setup to send digital surround sound directly
from a device to an A/V receiver.
1.
Under Learn, highlight Input2.
In this example, the IR code for the A/V receiver's
DVD Audio input will be "learned" as Input2.
2.
Press ENTER on the TV's remote control.
Setup 2: A/V receiver audio from a device providing
surround sound directly to the A/V receiver
Completed Net Command setup described for
controlling A/V receiver switching to an A/V receiver
input "learned" as Input2.
3.
While the text Input2 is flashing, press and hold the
DVD INPUT key on the A/V receiver's remote control.
4.
When a check appears next to
DVD INPUT key.
• If the text stops flashing before the check mark
appears, repeat this step.
• To erase the IR code just "learned," press
while the name is highlighted.
5.
Press once to automatically move the highlight to
the Assign Input2 column.
6.
Use to highlight DVD in the list of devices
recognized by the TV. The triangular marker always
shows the assigned sound source.
7.
Press EXIT if finished or continue for additional TV
sources.
6. NetCommand IR Control
Input2, release the
CANCEL
A/V Receiver Control: Automatic Audio
and Vi deo Switching via HDMI
If your A/V receiver has an HDMI output, you can use
this procedure to set up control of the A/V receiver's
audio and video switching. The HDMI connection
allows you to route video signals from multiple devices
over a single cable to the TV. See the diagram on this
page . The connected devices can be analog, digital, or
a mixture or the two.
TV main
panel DVD player
High-definition
HDMI HDMI
DVD player
4 4
3 3
2 2
A/V receiver with
HDMI output
1 1
IR- IR- NetCommand NetCommand
S-VIDEO S-VIDEO
Output / External Output / External
Controller Input Controller Input
INPUT3 INPUT3
Pr Pr
VIDEO VIDEO
Pb Pb b
L L
AUDIO AUDIO
R R
Y Y Y / VIDE Y / VIDEO Y O
DVI/PC DVI/PC
L L L L
AUDIO AUDIO
AUDIO AUDIO
R R
R R
INPUT2 2 INPUT2 INPUT1 INPUT1
DIGITAL DIGITAL DIGITAL T T
AUDIO AUDIO AUDIO
OUTPUT OUTPUT OUTPUT
L L L R R R
AVR AUDIO AVR AUDIO A A AUDIO AVR
OUTPUT OUTPUT OUTPUT
L
R
ANT2/AUX ANT2/AUX ANT1/MAIN ANT1/MAIN
AVR AUDIO
OUTPUT
Audio from TV to A/V Receiver
Multiple video inputs on a single H DMI cable. You can
connect multiple video devices to an A/V receiver that
has an HDMI output. The optional audio connection
allows you to hear, through the A/V receiver, devices
connected to the TV only.
More About Using an HDMI Connection with this
Setup
• Audio from devices connected directly to the TV
can be heard from the TV speakers only. This is
because audio signals are sent on the HDMI cable
in one direction only—from the A/V receiver to the
TV speakers.
To send audio to the A/V receiver from a device
connected directly to the TV, use one of the optional
audio connections shown in the diagram. For
Cable box
VCR
HDMI OUT
HDMI
cable
(Video to TV)
DIGITAL
AUDIO
OUTPUT
Optional
analog or
digital audio
connection
63